« previous next »
Pages: [1] 2

Author Topic: Kymco Agility 50ccm 2006 won't start  (Read 4198 times)

miller31

  • Newbie
  • *
  • Posts: 5
    • View Profile
Kymco Agility 50ccm 2006 won't start
« on: May 08, 2014, 10:17:36 AM »
Hello everybody I'm new to this forum and I hope for some help.

I have scooter Kymco Agility for 8 years now. It worked fine with some minor issues.

Now I have a problem. I recently bought new CDI unit unrestricted. When I installed it the scooter was working fine. I drove for a day and the next morning I started it and drove for 50m and the scooter died. I tried to start again and when I pulled the throttle scooter died and than I couldn't start it again. I've tried with the electric "button" start and kickstarter. Nothing...

1. I have gas in the tank.
2. spark plug is new - and I have spark - tested
3. when I push the button I hear the starter turning
4. I opened carburator and he's getting gas from fuel tank
5. I have new acumulator installed
6. I've tried with the old CDI and same problem

I had problems with the "button" electric start for two years now - so I always kicked started it. With the new CDI the scooter started with no problem (for 1 day).

What can I do? (sorry for my poor english)
Logged

tortoise

  • Hero Member
  • *****
  • Posts: 558
    • View Profile
Re: Kymco Agility 50ccm 2006 won't start
« Reply #1 on: May 08, 2014, 01:50:58 PM »
Quote from: miller31 on May 08, 2014, 10:17:36 AM
What can I do?
Check valve clearance . . section 3-5 of service manual.
Logged

miller31

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Kymco Agility 50ccm 2006 won't start
« Reply #2 on: May 08, 2014, 02:23:59 PM »
Thanks I suspected this. I will check valve clearence.
In service manual it says IN 0,04mm - OUT 0,04mm
I have 70ccm KIT this it make any difference?
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Kymco Agility 50ccm 2006 won't start
« Reply #3 on: May 09, 2014, 04:29:16 AM »
it is actually 0.004" or 0.1 mm

If you have spark, and fuel there are just 3 things left... Compression, valve timing, and spark timing. Do a compression test first. 120 PSI minimum.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

miller31

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Kymco Agility 50ccm 2006 won't start
« Reply #4 on: May 09, 2014, 05:45:22 AM »
In service manual it says 0,04mm (picture attached)

I will check today valve clearance. About spark timing and compression. I don't have testers for this so I'll have to visit a service for Kymco.
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Kymco Agility 50ccm 2006 won't start
« Reply #5 on: May 09, 2014, 07:09:08 AM »
I think that is a typo in the manuals. I've been setting them to 0.004" forever.

Wait for someone else to chime in.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

miller31

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Kymco Agility 50ccm 2006 won't start
« Reply #6 on: May 09, 2014, 07:42:42 AM »
I can't imagine how you could measure 0,004mm

The tool is from 0,05mm to 1,00 mm

Logged

Vivo

  • Hero Member
  • *****
  • Posts: 4980
    • View Profile
Re: Kymco Agility 50ccm 2006 won't start
« Reply #7 on: May 09, 2014, 08:11:59 AM »
Hey, you two... just decide on what unit to use.... English or Metric....  ;)

I just rock 'em rockers back and forth to feel the gap...  8) 8) 8)
« Last Edit: May 09, 2014, 08:16:56 AM by Vivo »
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Kymco Agility 50ccm 2006 won't start
« Reply #8 on: May 09, 2014, 09:50:27 AM »
English for the intake, and metric for the exhaust. Now we just gotta settle on a number.


Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

miller31

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Kymco Agility 50ccm 2006 won't start
« Reply #9 on: May 09, 2014, 07:05:30 PM »
My Kymco is running again. We adjusted the valves to IN 0,04mm OUT 0,04mm and it started right away.

I just wanna ask if the settings are the same because I have 72ccm Naraku cylinder kit on. I just wanna know if anything could be wrong if the valve settings are wrong? Because the IN valve was on 0,05mm and the OUT was 1,00mm and the scooter wasn't working.
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Kymco Agility 50ccm 2006 won't start
« Reply #10 on: May 09, 2014, 11:12:58 PM »
The kit used makes no difference. The settings will remain the same.
Glad to hear you got it Bro!
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

MoToFaLcon

  • Full Member
  • ***
  • Posts: 150
  • I Fly....
    • View Profile
Re: Kymco Agility 50ccm 2006 won't start
« Reply #11 on: May 12, 2014, 08:21:06 AM »
 ;D :'( ;D Vivo u funny. You just eyeball those valves lika og drug dealer, i dont need no damn scales!
Logged
WTF, i have a Ninja 650!!

Vivo

  • Hero Member
  • *****
  • Posts: 4980
    • View Profile
Re: Kymco Agility 50ccm 2006 won't start
« Reply #12 on: May 12, 2014, 08:33:05 AM »
Quote from: MoToFaLcon on May 12, 2014, 08:21:06 AM
;D :'( ;D Vivo u funny. You just eyeball those valves lika og drug dealer, i dont need no damn scales!

And I can know a pig's weight by just looking at it...  ;)
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Kymco Agility 50ccm 2006 won't start
« Reply #13 on: May 12, 2014, 08:37:16 AM »
How many fingers am I holding up?
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

Vivo

  • Hero Member
  • *****
  • Posts: 4980
    • View Profile
Re: Kymco Agility 50ccm 2006 won't start
« Reply #14 on: May 12, 2014, 08:41:53 AM »
Quote from: zombie on May 12, 2014, 08:37:16 AM
How many fingers am I holding up?
One, the middle one...
Logged

An Error Has Occurred!

Call to undefined function split()
Back