« previous next »
Pages: [1]

Author Topic: Loose wheel  (Read 1138 times)

grommet

  • Newbie
  • *
  • Posts: 7
    • View Profile
Loose wheel
« on: May 12, 2014, 08:13:02 AM »
I have a 2000 People 125 with 40000 kms on the clock, unfortunately the rear wheel nut loosens after a few kms, could this be a lock nut which is not locking? I would be grateful for any ideas.
Logged

Vivo

  • Hero Member
  • *****
  • Posts: 4980
    • View Profile
Re: Loose wheel
« Reply #1 on: May 12, 2014, 08:28:24 AM »
Maybe it just lacks tightening...
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Loose wheel
« Reply #2 on: May 12, 2014, 09:18:28 AM »
You can replace the nylok nut or use blue locktight or squeeze the nut in a vise to deform it slightly. There should also be a large backing washer between the nut, and the wheel.

Or tighten it. That's probably the best answer.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

grommet

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Loose wheel
« Reply #3 on: May 12, 2014, 03:10:29 PM »
Obviously I tighten it after every use, at least I now know that it is supposed to be a locking nut so I'll buy  a new one
Logged

grommet

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Loose wheel
« Reply #4 on: May 12, 2014, 03:26:16 PM »
Quote from: Vivo on May 12, 2014, 08:28:24 AM
Maybe it just lacks tightening...
silly of me not to realise, i dont usually tighten it til the  wheel falls off !
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Loose wheel
« Reply #5 on: May 13, 2014, 01:34:47 AM »
What wheel?
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

Vivo

  • Hero Member
  • *****
  • Posts: 4980
    • View Profile
Re: Loose wheel
« Reply #6 on: May 13, 2014, 06:56:45 AM »
Make sure the nut and axle are free from grease and oil to get the right torque value when tightening... Torque is 13 kgf-m
Logged

An Error Has Occurred!

Call to undefined function split()
Back