« previous next »
Pages: [1] 2

Author Topic: Something to prevent rusting of screws?  (Read 2048 times)

kimura

  • Full Member
  • ***
  • Posts: 103
  • 2012 super 8 50cc 2t
    • View Profile
Something to prevent rusting of screws?
« on: May 16, 2014, 02:26:58 PM »
I lost the caps that go on the screws, see attached pic.

Is there anything I should spray on there to prevent those screws from rusting?  maybe some WD-40?
Logged

Chris0381

  • Hero Member
  • *****
  • Posts: 652
    • View Profile
Re: Something to prevent rusting of screws?
« Reply #1 on: May 16, 2014, 02:29:36 PM »
Another flimsy setup. I see those caps can easily be lost. Replace with stainless steel or use a hot glue gun to fill the cavity. Hot glue can easily be pried out when time comes to remove screws.
Logged
2013 Super 8 50cc 2T Air Cooled Mfg'd 2012
Stock pipe derestriction
Smooth Boss
6.5gm Dr Pulley sliders
Malossi Torsion Controller
Malossi Fly Clutch- yellow springs
Polini Variator
#95 Main Jet
Purple Malossi Contra Spring
42 MPH on the flats with the wind

kimura

  • Full Member
  • ***
  • Posts: 103
  • 2012 super 8 50cc 2t
    • View Profile
Re: Something to prevent rusting of screws?
« Reply #2 on: May 16, 2014, 02:42:19 PM »
thanks for the reply,

but I don't have a hot glue gun, I'm looking for a cheaper alternative.  would wd-40 not be good enough.

1 month of riding, 450miles logged, I've lost 3 screws, 2 caps, and its leaking oil.  the struggle is real but damn I love this little scoot. lol
Logged

Chris0381

  • Hero Member
  • *****
  • Posts: 652
    • View Profile
Re: Something to prevent rusting of screws?
« Reply #3 on: May 16, 2014, 02:45:35 PM »
WD -40 applied now and then should help. Those caps aren't water tight to begin with as they are just cosmetic and I would recommend wd-40 even if you still have the caps on.
Logged
2013 Super 8 50cc 2T Air Cooled Mfg'd 2012
Stock pipe derestriction
Smooth Boss
6.5gm Dr Pulley sliders
Malossi Torsion Controller
Malossi Fly Clutch- yellow springs
Polini Variator
#95 Main Jet
Purple Malossi Contra Spring
42 MPH on the flats with the wind

AMAC1680

  • Hero Member
  • *****
  • Posts: 1076
  • Outdoorsman, Advocate, Paraplegic
    • View Profile
    • SEGS4VETS
Re: Something to prevent rusting of screws?
« Reply #4 on: May 16, 2014, 04:42:37 PM »
Quote from: kimura on May 16, 2014, 02:42:19 PM
thanks for the reply,

but I don't have a hot glue gun, I'm looking for a cheaper alternative. would wd-40 not be good enough.

1 month of riding, 450miles logged, I've lost 3 screws, 2 caps, and its leaking oil.  the struggle is real but damn I love this little scoot. lol

Try clear or black silicone caulk. Clean with a solvent before applying.

Be Big,
AMAC
Logged
www.SEGS4VETS.org
2017 Lance Cali Classic 200i
2013 SYM RV200
2013 Kymco Downtown 300
2010 Lance Cali Classic-sold
1973 VW Dune Buggy
1974 VW Meyers Manx

boo

  • Hero Member
  • *****
  • Posts: 926
  • I hate censorship people manipulate you
    • View Profile
WD-40 no
« Reply #5 on: May 16, 2014, 05:28:20 PM »
WD-40 is good for cleaning or dispersing water.
Not good as a rust preventive. I found that out the hard way.
Clear chalk is a good cheap way to go.
Logged
300GTI black
Pro 2A - member GOA & NRA

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Something to prevent rusting of screws?
« Reply #6 on: May 18, 2014, 10:04:41 PM »
Best thing is to replace all the mounting hardware with Stainless nuts/bolts/washers whatever.
It will cost you 2-3.00 to swap a few each week.

It's one of the best spent improvements.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

mrmike

  • Hero Member
  • *****
  • Posts: 725
  • Syuracuse, NY
    • View Profile
Re: Something to prevent rusting of screws?
« Reply #7 on: May 18, 2014, 11:45:39 PM »
  Forum member MASSCOOT recommended a product called Corrosion X to me. Find my post "Finally Done" dated April 17, 2013 in the GT300I column. I got a can and it seems to work well. The site is posted in a reply by MASSCOOT to my post.
« Last Edit: May 18, 2014, 11:52:16 PM by mrmike »
Logged
Blue '23 People S 150i ABS  Moto Discovery GPS bar, Shad SH33 top case, Iridium spark plug, Black reflective graphics, Battery Tender ring terminal cable, LED tag light.         
Past rides- '73 Honda 450, '00 Harley Softail Deuce, '10 Kymco People 150, '12 Kymco GTI 300, '21 Kymco X-Town 300i ABS

08087

  • 09' Peoples 200, NJ
  • Hero Member
  • *****
  • Posts: 1373
    • View Profile
Re: Something to prevent rusting of screws?
« Reply #8 on: May 19, 2014, 12:53:45 AM »
Stainless screws.
Logged
This posting is provided “AS IS” with no warranties either expressed or written and confers no rights. You assume all risk for your use, the author is not responsible for your inability to understand logic, ambiguous references, sarcasm, the imaginary friends living inside my head or William Shatner

lbmcconnell

  • Newbie
  • *
  • Posts: 18
    • View Profile
Re: Something to prevent rusting of screws?
« Reply #9 on: May 22, 2014, 03:24:55 PM »
WD-40 is water soluble. 
Logged

ophelia

  • Sr. Member
  • ****
  • Posts: 394
    • View Profile
Re: Something to prevent rusting of screws?
« Reply #10 on: May 22, 2014, 03:36:57 PM »
Another vote for stainless fasteners.
Logged
2011 Kymco Downtown 300i

MoToFaLcon

  • Full Member
  • ***
  • Posts: 150
  • I Fly....
    • View Profile
Re: Something to prevent rusting of screws?
« Reply #11 on: May 23, 2014, 01:05:22 AM »
Maybe duct tape or play doe?
Logged
WTF, i have a Ninja 650!!

Momma bear

  • Full Member
  • ***
  • Posts: 188
    • View Profile
Something to prevent rusting of screws?
« Reply #12 on: May 25, 2014, 12:18:00 AM »
You may find the same caps inside your top case . I did and replaced them. Throw a little Vaseline one the screws.
Ride safe
Logged
People300i

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: Something to prevent rusting of screws?
« Reply #13 on: May 25, 2014, 01:16:09 AM »
The plugs are only a couple bucks each. Now leaking oil, that should be your primary concern!!!!
Logged
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

kimura

  • Full Member
  • ***
  • Posts: 103
  • 2012 super 8 50cc 2t
    • View Profile
Re: Something to prevent rusting of screws?
« Reply #14 on: May 26, 2014, 09:43:17 PM »
thanks for the replies guys,

it stopped leaking oil since I've left the oil container under the seat half full.

I've been using a few drops of this bicycle chain lubricant to prevent any rust, lets see how it works out.
Logged

An Error Has Occurred!

Call to undefined function split()
Back