Author Topic: What did you do to your DownTown today?  (Read 160182 times)

kneeslider

  • Hero Member
  • *****
  • Posts: 547
    • View Profile
Re: What did you do to your DownTown today?
« Reply #480 on: October 19, 2016, 01:19:33 AM »
So regardless of the weight, the DrP parts will give a lower and higher range.

The weight determines what happens between the lowest point and highest point of the variator plate.
2019 Yamaha X-Max 250

tvniklas

  • Passed the golden age 40...
  • Full Member
  • ***
  • Posts: 124
    • View Profile
Re: What did you do to your DownTown today?
« Reply #481 on: October 29, 2016, 02:44:03 PM »
Today i did a new tune up and the clutch were glazy again after just 400km, but the rest were nice and clean.
Also changed back to orginal  roller from Pulley 15g.
Less acc but much calmer engine in crusie speed.
The engine sounds so much smother.
Also changed my front tire to Metzeler Feel Free from stock tire, so now i have new both front and back.
One thing i noticed was that the bearing is harder and that was a nice suprice since i thought i had to change them.
 Have a great weekend wishes from Sweden
Kymco Downtown 300i ABS -2013
ODO: 9950km
Dr Pulley 15g / Orginal rollers  (change all the time)
Gas average 0,29L/10km
From: Sweden
--------------------------------
Kymco Like 125  -2016  -Sold
Kymco Agility 50 -2015 -Sold
I have 14g ,15g and 15,5 Pulley´s to sell

Snorvey

  • Hero Member
  • *****
  • Posts: 680
    • View Profile
Re: What did you do to your DownTown today?
« Reply #482 on: October 29, 2016, 05:28:25 PM »
Have a great weekend wishes from Sweden

Snow in Sweden yet?

It's lovely across the water in Scotland (and has been for a couple of months). All change next week though as a bit of an Arctic chill is forecast to descend upon us.

In other Swedish news, I read that ABBA may be reforming!!!!

tvniklas

  • Passed the golden age 40...
  • Full Member
  • ***
  • Posts: 124
    • View Profile
Re: What did you do to your DownTown today?
« Reply #483 on: October 30, 2016, 07:04:45 AM »
Have a great weekend wishes from Sweden

Snow in Sweden yet?

It's lovely across the water in Scotland (and has been for a couple of months). All change next week though as a bit of an Arctic chill is forecast to descend upon us.

In other Swedish news, I read that ABBA may be reforming!!!!
Then we have same weater! The real cold and snow was suppose to come next week, but today they change the forecast from snow to rain 👍.
But the temp will drop to almost zero so maybe  its time  for car to work 😂😂
ABBA will never come together again, we can only hope..
Kymco Downtown 300i ABS -2013
ODO: 9950km
Dr Pulley 15g / Orginal rollers  (change all the time)
Gas average 0,29L/10km
From: Sweden
--------------------------------
Kymco Like 125  -2016  -Sold
Kymco Agility 50 -2015 -Sold
I have 14g ,15g and 15,5 Pulley´s to sell

donjack

  • Full Member
  • ***
  • Posts: 193
    • View Profile
Re: What did you do to your DownTown today?
« Reply #484 on: October 30, 2016, 07:40:55 AM »
ABBA, Agnetha was my favourite, school boy into adulthood crush!!
But..........

http://www.elleuk.com/life-and-culture/culture/articles/a32472/abba-are-reuniting-in-a-virtual-reality/

Better than nothing!!  ;D ;D ;D
« Last Edit: October 30, 2016, 07:44:23 AM by donjack »
Why Ride 1 Mile When 10 Will Do!!

kneeslider

  • Hero Member
  • *****
  • Posts: 547
    • View Profile
Re: What did you do to your DownTown today?
« Reply #485 on: October 31, 2016, 12:53:12 AM »
Replaced my air filter for the 1st time ever in 3 years and 39000kms.

Noticed the DT200 filter element is smaller than the ones for the DT300.

Will definitely be going with the DT300's air filter next time round, perhaps in another 3 years  ;)
2019 Yamaha X-Max 250

pipster326

  • Sr. Member
  • ****
  • Posts: 358
    • View Profile
Re: What did you do to your DownTown today?
« Reply #486 on: November 03, 2016, 08:12:34 PM »
Has anyone ever made their own gasket, for the cvt belt cover? If so , what did you use? Thanks


Sent from my iPhone using Tapatalk

Snorvey

  • Hero Member
  • *****
  • Posts: 680
    • View Profile
Re: What did you do to your DownTown today?
« Reply #487 on: November 04, 2016, 11:01:18 AM »
I used to make gaskets (inc head gaskets!) out of Corn Flakes boxes for a series of 2 stroke mopeds I had when I was younger and very much skint.

Kellogs boxes are the best, although other supermarket brands are available.
« Last Edit: November 04, 2016, 04:58:10 PM by Snorvey »

pipster326

  • Sr. Member
  • ****
  • Posts: 358
    • View Profile
Re: What did you do to your DownTown today?
« Reply #488 on: November 04, 2016, 02:49:06 PM »
Interesting, I just recycled a box of Frosted Flakes, damn it. I could've saved a few bucks. I just ordered some high heat gasket material for around $8. Thanks for the info.

 Rich


Sent from my iPad using Tapatalk

mousejunks

  • Hero Member
  • *****
  • Posts: 585
    • View Profile
Re: What did you do to your DownTown today?
« Reply #489 on: November 05, 2016, 04:30:01 AM »
I use permatex red gasket maker on my car's valve cover gasket, where it is constantly splashed with hot oil. Still good.
'09 Kymco Espresso 150i
'11 Kymco Downtown 300i ABS - 79,500km
'17 Kymco Downtown 350i ABS

pipster326

  • Sr. Member
  • ****
  • Posts: 358
    • View Profile
Re: What did you do to your DownTown today?
« Reply #490 on: November 06, 2016, 11:18:59 AM »
My gasket, on the cvt cover is torn up a bit. I know it's not a big deal, but I figured that I'll just make a new one. Now that the colder weather is moving in, I look for little things to keep me busy


Sent from my iPad using Tapatalk

ole two wheels

  • ole two wheels
  • Hero Member
  • *****
  • Posts: 747
    • View Profile
Re: What did you do to your DownTown today?
« Reply #491 on: November 12, 2016, 02:38:23 AM »
After a 20 ride at 65 to70 mph, I parked it in the garage and notice oil dripping from bottom side. Looked and the bottom side was soaked. Pulled the seat off and discovered the crankcase pressure recirculating hose from the valve cover to the intake had slipped off of the valve cover. It had one of those dinky little wire clamps on it. I replaced it with a screw type band clamp. End of leak. Just a messy clean up..
Mac 

2012 Kymco DT300
1996 Honda Shadow Spirit 1100

kneeslider

  • Hero Member
  • *****
  • Posts: 547
    • View Profile
Re: What did you do to your DownTown today?
« Reply #492 on: November 12, 2016, 12:36:20 PM »
Kinda the same thing happened to me 2 weeks back. The breather hose from the rear hub to the airbox came loose.


After a 20 ride at 65 to70 mph, I parked it in the garage and notice oil dripping from bottom side. Looked and the bottom side was soaked. Pulled the seat off and discovered the crankcase pressure recirculating hose from the valve cover to the intake had slipped off of the valve cover. It had one of those dinky little wire clamps on it. I replaced it with a screw type band clamp. End of leak. Just a messy clean up..
2019 Yamaha X-Max 250

kneeslider

  • Hero Member
  • *****
  • Posts: 547
    • View Profile
Re: What did you do to your DownTown today?
« Reply #493 on: November 12, 2016, 12:39:02 PM »
Changed a new rear tire. Mileage now 39850km.
2019 Yamaha X-Max 250

tvniklas

  • Passed the golden age 40...
  • Full Member
  • ***
  • Posts: 124
    • View Profile
Re: What did you do to your DownTown today?
« Reply #494 on: November 17, 2016, 08:14:35 PM »
Today i changed my broken outer variator, (i broke of a fin 😋)
I also changed to my new windshield, a Givi!

Last wendsday it snowed like ... here in Stockholm, from nothing to 45cm in one day and minus.
But the weather now have changed to the better, no snow on the roads and 4 plus degrees, so tomorrow il take the baby to work.
« Last Edit: November 17, 2016, 08:18:47 PM by tvniklas »
Kymco Downtown 300i ABS -2013
ODO: 9950km
Dr Pulley 15g / Orginal rollers  (change all the time)
Gas average 0,29L/10km
From: Sweden
--------------------------------
Kymco Like 125  -2016  -Sold
Kymco Agility 50 -2015 -Sold
I have 14g ,15g and 15,5 Pulley´s to sell

An Error Has Occurred!

Call to undefined function split()