Will a 201- exhaust fit a 20013 Super 8

[Chris0381]

I know someone who wants to sell a 2010 exhaust. I may want to buy it and try an exhaust mod. Not sure if its from a 2T of 4T.

Would both a 2010 2T or 4T exhaust fit a 2013 2T. ?

[zombie]

They are different inside, and out. They will not swap. Sorry.

You can look up the par numbers, and see.

http://www.kymcopartsmonster.com/p/Kymco-Parts

[BettinANDlosing]

If it's a 50 it's 2t. All the 50cc S8 are 2t and will work just fine.

[zombie]

agility 4t muffler 2013
1830A-LDC8-M30    MUFFLER COMP   $129.35

people 2t 2010
1830A-KFA6-E10  !    MUFFLER ASSY | is a saleable item.   $122.62

They both HAVE to be 2t mufflers.

[Chris0381]

A bit confusing now.

Thanks anyway I'll hold of buying it.

This is what I was going to buy :

http://www.ebay.com/itm/Original-OEM-stock-2010-Kymco-Super-8-50cc-Dealer-Take-Off-Muffler-Assembly-/171338113192?pt=Motorcycles_Parts_Accessories&hash=item27e48c20a8&vxp=mtr

I am hesitant about chopping  the pipes off my my original exhaust.

[zombie]

That is a four stroke 2010 pipe. It will not work on a 2t engine.

[BettinANDlosing]

Wrong, that's a 2t pipe!!!! Never have they made the super 8 50 in 4T !!!!! That pipe is off a 2t bike. My only question is why do you want it? Is yours bad?

[Chris0381]

Wrong, that's a 2t pipe!!!! Never have they made the super 8 50 in 4T !!!!! That pipe is off a 2t bike. My only question is why do you want it? Is yours bad?

I want to mod it by cutting off the blind pipes and keeping my original one stock should it take a while to do.

[BettinANDlosing]

That exhaust will work for you. A bit expensive for that, but it'll fit no prob.

[Chris0381]

That exhaust will work for you. A bit expensive for that, but it'll fit no prob.

Thanks Bettin. Im seeing $259 for a stock exhaust from the parts suppliers. But if it get me an extra 5 MPH and better performance on the hills, I think $120 is affordable. I cant find the pipes any cheaper that $100.

[zombie]

B7L,
You beat me down... I looked at the Emissions fitting, and thought it was a 4t reed assembly.
On zooming into the Pict. you can see it is stamped KF10AA.
I stand corrected... Sorry for the confusion Chris.

$259.00 sounds too high.
The two examples I posted on top are the retail price for those pipes. Try the site I linked to double check the price. It is a 2010 S8 2t pipe

[BettinANDlosing]

B7L,
You beat me down... I looked at the Emissions fitting, and thought it was a 4t reed assembly.
On zooming into the Pict. you can see it is stamped KF10AA.
I stand corrected... Sorry for the confusion Chris.

$259.00 sounds too high.
The two examples I posted on top are the retail price for those pipes. Try the site I linked to double check the price. It is a 2010 S8 2t pipe

Haha yeah its a derp lookin stock exhaust for sure. And Chris, make sure you take it too a good machine shop to get it mig welded. You don't want to pay to have it done right again.

[Chris0381]

Haha yeah its a derp lookin stock exhaust for sure. And Chris, make sure you take it too a good machine shop to get it mig welded. You don't want to pay to have it done right again.

Mig welding is where it gets expensive. Was hoping I could use pipe clamps and clamp rounded metal over it. I may need to hold off for now as I d expect a welding shop would charge more than what I paid for the exhaust pipes.

[BettinANDlosing]

Whatever you do, don't just house clamps or whatever. You'll lose because it WILL leak. Mig is not expensive, from my experience most machine shops charge 40-50$ minimum. It's not worth doing unless you weld it. If you UPS your exhaust top me is$50 for the whole thing plus shipping.

[Chris0381]

Whatever you do, don't just house clamps or whatever. You'll lose because it WILL leak. Mig is not expensive, from my experience most machine shops charge 40-50$ minimum. It's not worth doing unless you weld it. If you UPS your exhaust top me is$50 for the whole thing plus shipping.

Thanks Bettin.

I'll do some thinking. Still eager to take off the variator to see if the smooth boss is actually on.