[VIDEO] Super8 150 Valve Clearance Adjustment

[wkreps]

[tortoise]

2 of 3 video is presently showing "private video" . . please change setting to public.

[Stig / Major Tom]

1 & 3 good videos!!
Waiting for 2.
Feedback: might drop a shop rag over the battery.
A hand mirror will help check the holes on the sprocket.
I use a few drops of gear oil on the moving parts before replacing valve cover.....the heavy gear oil tends to not drip off so quickly.(haven't seen 2 yet...maybe you already did this.
Small #2 philips driver bit in a small ratchet might get to that awkward panel screw...but a right angle screw driver is a good tool for the underseat.
Overall, good job for you first valve rodeo!
Stig

[blackhawkfan]

Another Kymco rider waiting for video #2...just sayin'.  Please make it public soon

[wkreps]

Sorry about that. Should be fixed now.

[wkreps]

I use a few drops of gear oil on the moving parts before replacing valve cover.....the heavy gear oil tends to not drip off so quickly.(haven't seen 2 yet...maybe you already did this.

I didn't oil. I could feel oil on the nuts and adjusting screws when I was adjusting them. Good point though. If you would leave it in the video comments I would appreciate it.

[blackhawkfan]

Thanks for putting up the second one--yet another informative set of videos.