Author Topic: Brand new agility 125 won't start  (Read 1609 times)

agil125

  • Newbie
  • *
  • Posts: 1
    • View Profile
Brand new agility 125 won't start
« on: June 30, 2014, 05:16:53 AM »
I just bought a new agility 125 yesterday and hit my 200 mile mark today. i did the oil and gear change as the manual said and now it won't start. when i first got it, it was acting funny as well. i would start it and then it would sputter and hesitate as if if was going to cut off, but when i throttled it, it rode fine. it did cut off at the stop light one time as well, but started back up and rode good. but now after I've changed the engine oil and gear oil it won't start. after i changed it, i idled it for 3 minutes like the sticker said on the engine, and it idled like it normally does. then i cut it off to run in my dorm, came back out and now it won't start at all. please help i just bought this thing. its under dealer warranty, but before i contact them i would like to resort here. i know there probably gonna think i done something wrong so please help. i used motorcycle 10w40 full syntactic oil and auto zone saw 80-90, so those can't be the problem.

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: Brand new agility 125 won't start
« Reply #1 on: June 30, 2014, 07:28:15 AM »
Check your kill switch yo
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: Brand new agility 125 won't start
« Reply #2 on: June 30, 2014, 04:15:06 PM »
Did you change your spark plug to? Maybe the bike is flooded try starting with the throttle pulled all the way
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

DMblues01

  • 2012 Kymco Super 8 150
  • Sr. Member
  • ****
  • Posts: 455
    • View Profile
Re: Brand new agility 125 won't start
« Reply #3 on: June 30, 2014, 09:47:38 PM »
My Super 8 did that, and I found the auto choke had come unplugged and wasn't shutting off. And check for any loose vacuum lines.
I agree with Bettin though, I sounds like it may be flooded out.
Also, when my scoot was idling rough, I adjusted the idle screw up just a touch, and it smoothed out better.

And on your oil, I wouldn't use synthetic until after the break in period so that all the seals and engine parts can wear in and seat properly. I was advised to switch to synth after 1000 to 1500 miles.
Roxana, IL

Yoda is my spiritual leader.
Vader is my anger management coach!

kingkymco125

  • Hero Member
  • *****
  • Posts: 529
    • View Profile
Re: Brand new agility 125 won't start
« Reply #4 on: July 05, 2014, 01:52:02 AM »
Congrats on your new bike. I have had mine for over 18 months and they are great bikes. 8)
David M.  Las Vegas, Nevada
New 2012 Kymco Agility 125cc bike

MaryK

  • Sr. Member
  • ****
  • Posts: 498
    • View Profile
Re: Brand new agility 125 won't start
« Reply #5 on: July 05, 2014, 06:56:48 PM »
If it is a new scooter, then you should have a warranty.  Hopefully your dealer is nearby.
It is ok to try simple repairs, but use the warranty if there is a real problem.

Scoot Safely,
New Rider in 2010

2009 GrandVista 250

An Error Has Occurred!

Call to undefined function split()