Author Topic: hesitating acceleration  (Read 773 times)

codger78

  • Full Member
  • ***
  • Posts: 113
    • View Profile
hesitating acceleration
« on: September 21, 2014, 07:12:58 PM »
when I rev my engine there is a hesitation and the engine wants to quit
borrowed dust

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: hesitating acceleration
« Reply #1 on: September 21, 2014, 07:46:54 PM »
Start with a carb clean, issues like that you need to have a good baseline to start tuning. After the carb it's good try adjusting the mixture screw. Start at 2 1\2 turns out and go from there. The agility tends to like a little richer than that but it's a good starting point. Check everything else, air filter spark plug etc.
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

An Error Has Occurred!

Call to undefined function split()