« previous next »
Pages: [1]

Author Topic: please help.  (Read 1603 times)

Ahmad Mustafa

  • Newbie
  • *
  • Posts: 7
    • View Profile
please help.
« on: September 27, 2014, 10:41:59 PM »
can the Malossi variator adjuster spring(white) be applied to the stock clutch?

Thanks
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: please help.
« Reply #1 on: September 28, 2014, 04:09:40 AM »
Yes. That is a lighter than OEM spring however.
If you want to run that one you need very light rollers. That combo usually works well for heavier people.
If you try it w/ OEM rollers you will find a loss of acceleration, and a huge bog when going up hill.
Swap to light rollers, and performance will improve above OEM
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

Ahmad Mustafa

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: please help.
« Reply #2 on: September 28, 2014, 09:19:41 AM »
Thanks sir,,
I am using dr. Pulley 14 gm rollers,,, is it  okay?
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: please help.
« Reply #3 on: September 28, 2014, 11:46:19 AM »
Is 16 gram the OEM weight?
Did you get slightly more RPM w/ the Dr Pulley? Are they the rollers or Sliders you are using?

If they are the rollers I would go w/ either Malossi purple or red for the spring. If you are over 200 lbs go red.
At or near 200 go w/ the purple.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

Ahmad Mustafa

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: please help.
« Reply #4 on: October 29, 2014, 03:41:16 PM »
The OEM weight is 15.4 gm and yes i got a little higher rpm
I installed both the rollers and the sliders
I am around 180 Lbs
I will  install malossi yellow clutch springs

so what is the best adjuster spring to use?
brand and colour please
thanks
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: please help.
« Reply #5 on: November 19, 2014, 12:48:59 AM »
Red or Purple Malossi are what I would use.
OR a set of 14 gram sliders, and the yellow or white Malossi.

Sorry for the long delay.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

An Error Has Occurred!

Call to undefined function split()
Back