Author Topic: Alternator Output  (Read 883 times)

Jim Moore

  • Jr. Member
  • **
  • Posts: 89
    • View Profile
Alternator Output
« on: March 12, 2015, 11:30:18 AM »
The battery in my A125 died yesterday. As I was messing with it I checked the alternator output. The battery reads 12.65 engine off. With the engine running and some rpm it reads over 14, like 14.25 or so. That seems a little high, but I'm not an electrical expert. What do you guys think?

MrXT

  • Jr. Member
  • **
  • Posts: 85
    • View Profile
Re: Alternator Output
« Reply #1 on: March 12, 2015, 09:09:45 PM »
That seems perfectly fine. If you measured the output voltage of a 12v car battery charger you would see its about the same.
Kymco agility city 125cc (2013)
4000km

Jim Moore

  • Jr. Member
  • **
  • Posts: 89
    • View Profile
Re: Alternator Output
« Reply #2 on: March 13, 2015, 12:26:28 PM »
Thanks. I guess my battery is just shot.

MrXT

  • Jr. Member
  • **
  • Posts: 85
    • View Profile
Re: Alternator Output
« Reply #3 on: March 18, 2015, 04:56:33 AM »
Thanks. I guess my battery is just shot.

12.6v isnt bad for a 12v SLA battery or VLA battery. Just bring it inside and charge it up. The so called alternator on scooters and motorbikes doesn't charge up the battery as efficiently as a car does. Just try charging it up at a plug socket and check the voltage afterwards. Im sure it will live again. Its only really dead if its below about 10.5volts.
Kymco agility city 125cc (2013)
4000km

An Error Has Occurred!

Call to undefined function split()