« previous next »
Pages: [1]

Author Topic: TPS code  (Read 1490 times)

solberglandandcattle

  • Newbie
  • *
  • Posts: 15
    • View Profile
TPS code
« on: April 14, 2015, 10:04:01 PM »
I've started to narrow my no power problem down its running a TPS code, now I ordered a new sensor and put it in, and it's still running the code, anybody have any ideas??
Logged

de dee

  • Hero Member
  • *****
  • Posts: 2055
  • 2011 300i downtown 82,265 KM.
    • View Profile
Re: TPS code
« Reply #1 on: April 14, 2015, 10:13:24 PM »
what kind of scooter do you have , to have tire sensor code read out,. is that part of ABS brakes, 
Logged

solberglandandcattle

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: TPS code
« Reply #2 on: April 15, 2015, 07:33:54 PM »
It's a 2012 500i side by side. I was meanin the throttle position sensor
Logged

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: TPS code
« Reply #3 on: April 15, 2015, 09:43:30 PM »
Could be the ECU itself not picking up the TPS signal. Double check all the wiring too.
Logged
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

carmen007

  • Newbie
  • *
  • Posts: 33
    • View Profile
Re: TPS code
« Reply #4 on: April 20, 2015, 06:30:51 PM »
Are you getting a 06 code
Logged
2013 Kymco People GT 300I
14g Dr pulley

2009 Schwinn Newport 150
2012 Genuine Buddy 125

solberglandandcattle

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: TPS code
« Reply #5 on: April 22, 2015, 07:56:57 PM »
It's giving me a p1121 code, put a new throttle position sensor in and no change, can't get rid of the code nothin
Logged

JoeMarshall

  • Newbie
  • *
  • Posts: 41
    • View Profile
Re: TPS code
« Reply #6 on: June 01, 2015, 01:11:58 AM »
Did you get the code to disappear. and did you do the reset procedure. Also you will need to do the relearn for the tps.
Logged

An Error Has Occurred!

Call to undefined function split()
Back