« previous next »
Pages: [1]

Author Topic: Questions before next DIY project  (Read 675 times)

leo.portner

  • Jr. Member
  • **
  • Posts: 58
    • View Profile
Questions before next DIY project
« on: May 06, 2015, 06:34:52 AM »
I'm thinking to cut and shorten the front windshield on my xciting,
Anyone did this before?
What tool should i use to prevent the plastic from cracking?
Logged

Chris0381

  • Hero Member
  • *****
  • Posts: 652
    • View Profile
Re: Questions before next DIY project
« Reply #1 on: May 06, 2015, 01:42:37 PM »
You can dremel it but expect some plastic melting and a lot of filing and sanding afterwards.

Plexiglas cutters mainly only cut straight and used for hard plastic laid completely flat.
Logged
2013 Super 8 50cc 2T Air Cooled Mfg'd 2012
Stock pipe derestriction
Smooth Boss
6.5gm Dr Pulley sliders
Malossi Torsion Controller
Malossi Fly Clutch- yellow springs
Polini Variator
#95 Main Jet
Purple Malossi Contra Spring
42 MPH on the flats with the wind

leo.portner

  • Jr. Member
  • **
  • Posts: 58
    • View Profile
Re: Questions before next DIY project
« Reply #2 on: May 06, 2015, 06:45:00 PM »
I saw some videos on YouTube where people used a jigsaw with a fine blade and no plastic melted maybe it is better then a Darmel tool...
Any thoughts on how to Tony it black but still keep it clear to see throw?
Tinting film?
Logged

Chris0381

  • Hero Member
  • *****
  • Posts: 652
    • View Profile
Re: Questions before next DIY project
« Reply #3 on: May 06, 2015, 09:09:17 PM »
I think film would be your best bet.

My windshield is black and I was thinking of etching a design of some sort into the winshield and placing an led light behind it for some fun at night.
Logged
2013 Super 8 50cc 2T Air Cooled Mfg'd 2012
Stock pipe derestriction
Smooth Boss
6.5gm Dr Pulley sliders
Malossi Torsion Controller
Malossi Fly Clutch- yellow springs
Polini Variator
#95 Main Jet
Purple Malossi Contra Spring
42 MPH on the flats with the wind

TLRam1

  • Sr. Member
  • ****
  • Posts: 381
    • View Profile
Re: Questions before next DIY project
« Reply #4 on: May 06, 2015, 09:29:17 PM »
Yes, jigsaw, fine tooth blade, masking tape on both sides.
Logged
Terry
10 Kymco People S 250
87 Yamaha Riva 200 (Sold)
Allen TX (Dallas)
cli-maxridinggear.com

An Error Has Occurred!

Call to undefined function split()
Back