Author Topic: Help!  (Read 2486 times)

demeter

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
Help!
« on: May 15, 2015, 02:21:28 AM »
An exhaust nut sheared off and the rattling made the whole exhaust fall off. I'm about a mile from home.. Is it safe to ride home without the exhaust attached?
2010 Like 50 2T (Malossi 70cc BBK, Tecnigas Next-R, Blue Polini Torque Spring, Yellow Clutch Springs, 5.5g Sliders, Stock Carb: 95 MJ, Stock Airbox Drilled, PIAA GT-X Headlight, Kolite 5630 Running Lights, 140/70-12 Rear Tire)

beermak

  • Sr. Member
  • ****
  • Posts: 327
    • View Profile
Re: Help!
« Reply #1 on: May 15, 2015, 02:25:24 AM »
Happened to me in the past and by the time i was home the exhaust was trashed...


Enviado desde mi iPad utilizando Tapatalk

demeter

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
Re: Help!
« Reply #2 on: May 15, 2015, 02:28:24 AM »
The exhaust is totally off. I'm holding it. I pulled over before I trashed it.

Just waiting for someone to give me the ok to ride home or to wait for someone to pick me up.
2010 Like 50 2T (Malossi 70cc BBK, Tecnigas Next-R, Blue Polini Torque Spring, Yellow Clutch Springs, 5.5g Sliders, Stock Carb: 95 MJ, Stock Airbox Drilled, PIAA GT-X Headlight, Kolite 5630 Running Lights, 140/70-12 Rear Tire)

demeter

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
Re: Help!
« Reply #3 on: May 15, 2015, 03:00:09 AM »
Well I went for it and made it home fine. Woo! :)
2010 Like 50 2T (Malossi 70cc BBK, Tecnigas Next-R, Blue Polini Torque Spring, Yellow Clutch Springs, 5.5g Sliders, Stock Carb: 95 MJ, Stock Airbox Drilled, PIAA GT-X Headlight, Kolite 5630 Running Lights, 140/70-12 Rear Tire)

demeter

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
Re: Help!
« Reply #4 on: May 15, 2015, 04:02:17 AM »
Err!! Just went to put it back on and saw I lost the gasket and both manifold nuts.  :'(
2010 Like 50 2T (Malossi 70cc BBK, Tecnigas Next-R, Blue Polini Torque Spring, Yellow Clutch Springs, 5.5g Sliders, Stock Carb: 95 MJ, Stock Airbox Drilled, PIAA GT-X Headlight, Kolite 5630 Running Lights, 140/70-12 Rear Tire)

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14693
  • Rural Ohio
    • View Profile
Re: Help!
« Reply #5 on: May 15, 2015, 07:19:42 PM »
Err!! Just went to put it back on and saw I lost the gasket and both manifold nuts.  :'(
Not too expensive for the parts, if the pipe is OK?
But the wait might be a problem for the parts.
Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: Help!
« Reply #6 on: May 15, 2015, 08:02:31 PM »
Not too expensive for the parts, if the pipe is OK?
But the wait might be a problem for the parts.
Stig

I can get you the bolts, and gasket within a few days.
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

blue

  • Hero Member
  • *****
  • Posts: 3935
    • View Profile
Re: Help!
« Reply #7 on: May 16, 2015, 12:31:05 AM »
I have seen worse.ride it home.

blue

  • Hero Member
  • *****
  • Posts: 3935
    • View Profile
Re: Help!
« Reply #8 on: May 16, 2015, 12:32:34 AM »
Just go slow and easy.

Chris0381

  • Hero Member
  • *****
  • Posts: 652
    • View Profile
Re: Help!
« Reply #9 on: May 16, 2015, 04:08:36 AM »
In the mean time he can use regular bolts with some anti-seize ????
2013 Super 8 50cc 2T Air Cooled Mfg'd 2012
Stock pipe derestriction
Smooth Boss
6.5gm Dr Pulley sliders
Malossi Torsion Controller
Malossi Fly Clutch- yellow springs
Polini Variator
#95 Main Jet
Purple Malossi Contra Spring
42 MPH on the flats with the wind

demeter

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
Re: Help!
« Reply #10 on: May 16, 2015, 04:39:13 AM »
Not too expensive for the parts, if the pipe is OK?
But the wait might be a problem for the parts.
Stig

Pipes fine thankfully.

I can get you the bolts, and gasket within a few days.

I'll message you. I need them.

--

Exhaust is back on and I'm riding! :)

I went to my local scooter shop but they didn't have the right size gasket. They did give me regular nuts and washers that fit. I popped the old gasket off my stock exhaust and am using that for now.

Quick question. The old stock exhaust only used a metal ring gasket. The Tecnigas came with like a paper type gasket. That's what I lost. Was I supposed to use both on the new exhaust? The metal ring and the paper one together. Or one or the other? I originally only installed it with the paper one.. The manifold has a nice little recess for the metal ring.
2010 Like 50 2T (Malossi 70cc BBK, Tecnigas Next-R, Blue Polini Torque Spring, Yellow Clutch Springs, 5.5g Sliders, Stock Carb: 95 MJ, Stock Airbox Drilled, PIAA GT-X Headlight, Kolite 5630 Running Lights, 140/70-12 Rear Tire)

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: Help!
« Reply #11 on: May 16, 2015, 04:48:49 AM »
Cool, good news. The ring type i like better, but are sorta one time use because they squish to seal. With the technigas i would use only the squish type. Just have one or two spares for when you take the pipe off. I have all the OEM stuff in stock.
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

An Error Has Occurred!

Call to undefined function split()