« previous next »
Pages: [1]

Author Topic: Exh manifold broke, AGAIN!!!  (Read 1679 times)

leo.portner

  • Jr. Member
  • **
  • Posts: 58
    • View Profile
Exh manifold broke, AGAIN!!!
« on: May 20, 2015, 07:37:44 PM »
Was doing 80mph on the freeway when a loud bang and then brrrrrrrrraaaaaapppp
Already know that sound so i stop at the side of the road pick up the broken peace that is dragging on the road and keep going until i make it home...

Had to get a new manifold from the wreck yard
Logged

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: Exh manifold broke, AGAIN!!!
« Reply #1 on: May 20, 2015, 08:49:35 PM »
Double check the torque on the three hanger bolts, if these are loose you will keep breaking exhausts. Warm the bike up and check the tightness, use blue loctite.
Logged
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

leo.portner

  • Jr. Member
  • **
  • Posts: 58
    • View Profile
Re: Exh manifold broke, AGAIN!!!
« Reply #2 on: May 22, 2015, 06:10:56 PM »
Wtf is a tree hanger??
Logged

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: Exh manifold broke, AGAIN!!!
« Reply #3 on: May 22, 2015, 06:26:56 PM »
Quote from: leo.portner on May 22, 2015, 06:10:56 PM
Wtf is a tree hanger??

No, THREE LOL. The bolts that hold the muffler to the swingarm are called "hanger bolts" make sure they are torqued to spec because if they are loose you will keep breaking manifolds.
Logged
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

leo.portner

  • Jr. Member
  • **
  • Posts: 58
    • View Profile
Re: Exh manifold broke, AGAIN!!!
« Reply #4 on: May 22, 2015, 06:52:10 PM »
LOL
any chance you have the torque specs
Logged

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: Exh manifold broke, AGAIN!!!
« Reply #5 on: May 22, 2015, 06:54:57 PM »
Quote from: leo.portner on May 22, 2015, 06:52:10 PM
LOL
any chance you have the torque specs

My torque spec: Impact gun set on high for a couple bursts :) With blue loctite
Logged
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

leo.portner

  • Jr. Member
  • **
  • Posts: 58
    • View Profile
Re: Exh manifold broke, AGAIN!!!
« Reply #6 on: May 22, 2015, 07:00:20 PM »
Ok so i will check the tree hanger bolts
Logged

An Error Has Occurred!

Call to undefined function split()
Back