Author Topic: Help  (Read 3757 times)

scooterdad2324

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Help
« on: June 13, 2015, 01:34:34 PM »
I'm wanting to make my 2011 kymco agility 50 go faster than 34 mph. I have already cut into the cdi box. What else can I do to make it faster. I don't have any extra money to spend on it but I really need a little more speed. I use this scooter everyday for work and am tired of being shot the finger [emoji35]. Please help


Sent from my XT1526 using Tapatalk


thenaaks

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Help
« Reply #1 on: June 14, 2015, 01:01:28 AM »
look up variator restriction. Honestly, 34mph isn't bad. Go on a diet. Lost weight is like a horsepower increase.

blue

  • Hero Member
  • *****
  • Posts: 3935
    • View Profile
Re: Help
« Reply #2 on: June 14, 2015, 02:26:29 AM »
You will need  to do 3 things. Cut cdi go up  a few sizes on your main jet I think its a 82 and most of all change the drive boss.you should be able to do 40 to 45 easy with all 3 things done, one wont work all 3 must be done to work, and also you may have to raise or lower the needle in the carb, But try the frist 3 frist.
« Last Edit: June 14, 2015, 03:15:10 AM by blue »

scooterdad2324

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: Help
« Reply #3 on: June 14, 2015, 05:31:57 AM »
Thanks for the advice blue I appreciate it

Sent from my XT1526 using Tapatalk


scooterdad2324

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: Help
« Reply #4 on: June 14, 2015, 05:32:48 AM »
look up variator restriction. Honestly, 34mph isn't bad. Go on a diet. Lost weight is like a horsepower increase.
Lol OK thanks for the advice I appreciate it

Sent from my XT1526 using Tapatalk


scooterdad2324

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: Help
« Reply #5 on: June 14, 2015, 01:04:01 PM »
Lol OK thanks for the advice I appreciate it

Sent from my XT1526 using Tapatalk
Would changing the rollers to 5.5g help. I've heard a lot about that too

Sent from my XT1526 using Tapatalk


zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Help
« Reply #6 on: June 14, 2015, 06:49:32 PM »
Lighter rollers allow the engine to spin up to rpm faster. It's like your fat buddy just fell off the back of the bike.

They won't make the top RPM too high, just quicker to get there. Also the RED Malossi spring is part of that mod.
Do the first three that blue listed, and the rollers, and spring next, and you will get that 45 mph, and a bit quicker too.
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

scooterdad2324

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: Help
« Reply #7 on: June 14, 2015, 10:26:23 PM »
Lighter rollers allow the engine to spin up to rpm faster. It's like your fat buddy just fell off the back of the bike.

They won't make the top RPM too high, just quicker to get there. Also the RED Malossi spring is part of that mod.
Do the first three that blue listed, and the rollers, and spring next, and you will get that 45 mph, and a bit quicker too.
OK great thanks for the advice. I appreciate it

Sent from my XT1526 using Tapatalk


zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Help
« Reply #8 on: June 15, 2015, 05:32:12 AM »
Tell your fat buddy, I was joking.

I don't need a situation here at the house.
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

scooterdad2324

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: Help
« Reply #9 on: June 16, 2015, 06:14:03 PM »
Tell your fat buddy, I was joking.

I don't need a situation here at the house.
Lol OK cool no problem[emoji1]

Sent from my XT1526 using Tapatalk


scooterdad2324

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: Help
« Reply #10 on: June 21, 2015, 10:46:48 PM »
Lol OK cool no problem[emoji1]

Sent from my XT1526 using Tapatalk
In the middle of installing a car radio and speakers to make my scooter more pimping Lol. Will let y'all know how this turns out[emoji120]

Sent from my XT1526 using Tapatalk


zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Help
« Reply #11 on: June 22, 2015, 09:06:24 PM »
If you add subs, and an amp... Face the subs backwards. The scoot will be twice as fast.

Or like Blue... You can throw it off a cliff. I hear his did 120mph for a minute.
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

scooterdad2324

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: Help
« Reply #12 on: June 22, 2015, 10:50:01 PM »
If you add subs, and an amp... Face the subs backwards. The scoot will be twice as fast.

Or like Blue... You can throw it off a cliff. I hear his did 120mph for a minute.
Lol I'll keep that in mind

Sent from my XT1526 using Tapatalk


scooterdad2324

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: Help
« Reply #13 on: June 22, 2015, 11:03:16 PM »
Well its a no on the radio. Can't find one I can use that's either really cheap or free Lol. Guess I'm stuck with my phone and earplugs

Sent from my XT1526 using Tapatalk


scooterdad2324

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: Help
« Reply #14 on: June 22, 2015, 11:10:29 PM »
My son who is 15 is wanting a scooter like mine really bad. Does anyone on here happen to have a kymco agility 50cc they would like to sell at a reasonable price ?  If so please let me know. Help please

Sent from my XT1526 using Tapatalk


An Error Has Occurred!

Call to undefined function split()