Author Topic: PHBG installatin help please  (Read 20589 times)

TheAmishSasquatch

  • Sr. Member
  • ****
  • Posts: 253
    • View Profile
Re: PHBG installatin help please
« Reply #75 on: July 09, 2015, 06:48:33 PM »
Today I took the Dell rep apart to have a better idea of what I have, and I now have a few questions. Here is a pic of what's what with my carb.
Which is what? I know the #75 is the main jet but what are the others called?  Isnt the holder of the main called an air corrector? Which sizes of each should I order as per our earlier discussions?
« Last Edit: July 09, 2015, 06:56:55 PM by TheAmishSasquatch »

TheAmishSasquatch

  • Sr. Member
  • ****
  • Posts: 253
    • View Profile
Re: PHBG installatin help please
« Reply #76 on: July 09, 2015, 06:52:50 PM »
How do I remove the nozzle pictured?

Triesandluth

  • Hero Member
  • *****
  • Posts: 813
  • Getting it, a mile per hour at a time
    • View Profile
Re: PHBG installatin help please
« Reply #77 on: July 09, 2015, 09:12:23 PM »
No number on the small one? If that 60 is your pilot, which I would guess it to be, then that thing is HUGE!

Sent from my XT1080 using Tapatalk

Almost...at...speed...limit... Aww, brake lights..

TheAmishSasquatch

  • Sr. Member
  • ****
  • Posts: 253
    • View Profile
Re: PHBG installatin help please
« Reply #78 on: July 09, 2015, 09:17:49 PM »
I wonder if they went large on the pilot to ballance the small 75 main?  The smallest jet has no markings. And Im not sure how to or if the nozzle is removable??

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: PHBG installatin help please
« Reply #79 on: July 10, 2015, 12:23:56 AM »
The TINY jet is the idle jet. The large #60 is the choke fuel jet. The other large tube is the emulsion tube. To get the current spray nozzle out you use a punch and gently tap it downwards towards the float.
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: PHBG installatin help please
« Reply #80 on: July 10, 2015, 12:25:32 AM »
I would guess for your setup, pilot #38-#42 and main #85-#95 just guessing though.
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

TheAmishSasquatch

  • Sr. Member
  • ****
  • Posts: 253
    • View Profile
Re: PHBG installatin help please
« Reply #81 on: July 10, 2015, 12:52:19 AM »
Thanks B&L. Do you think the #60 choke is the correct size?

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: PHBG installatin help please
« Reply #82 on: July 10, 2015, 12:57:17 AM »
Thanks B&L. Do you think the #60 choke is the correct size?
Yeah choke jet doesnt matter really.
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

TheAmishSasquatch

  • Sr. Member
  • ****
  • Posts: 253
    • View Profile
Re: PHBG installatin help please
« Reply #83 on: July 10, 2015, 01:54:33 AM »
Today I ordered the AU 262 atomizer and nozzle from Treatland. Oh and I forgot to post up but the last week I made a few custom "Yeti Moto" manual choke cables. If anyone's interested I have 3 ready to go. $15 shipped anywhere in the lower 48.
« Last Edit: July 10, 2015, 01:57:46 AM by TheAmishSasquatch »

Triesandluth

  • Hero Member
  • *****
  • Posts: 813
  • Getting it, a mile per hour at a time
    • View Profile
Re: PHBG installatin help please
« Reply #84 on: July 10, 2015, 02:39:26 AM »
That's awesome!

Sent from my XT1080 using Tapatalk

Almost...at...speed...limit... Aww, brake lights..

TheAmishSasquatch

  • Sr. Member
  • ****
  • Posts: 253
    • View Profile
Re: PHBG installatin help please
« Reply #85 on: July 10, 2015, 12:22:55 PM »
That's awesome!

Sent from my XT1080 using Tapatalk
Thanks. Ive already sold one on Brents site. The fellow should get it today. Im anxious to hear some feedback.

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: PHBG installatin help please
« Reply #86 on: July 10, 2015, 04:25:15 PM »
I had to downjet a number of sizes after installing the AU setup. Try what you have first, but mine was REALLLLLLLY rich after switching to that AU setup.
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

TheAmishSasquatch

  • Sr. Member
  • ****
  • Posts: 253
    • View Profile
Re: PHBG installatin help please
« Reply #87 on: July 10, 2015, 09:47:31 PM »
I just won an eBay auction of 16x various jets. Most are going to be unusable but included is a 38, 40 and I think 42 idle jet, a 95 and 100 main and a 110 main. The rest are eith way high or way low. For under $10 shipped I really couldnt go wrong. Still need to get an assortment nearer the sizes Im interested but couldnt pass up this deal.  Seller posted they were used for his son when he used to race motocross.

Triesandluth

  • Hero Member
  • *****
  • Posts: 813
  • Getting it, a mile per hour at a time
    • View Profile
Re: PHBG installatin help please
« Reply #88 on: July 11, 2015, 05:29:41 AM »
Good score

Sent from my XT1080 using Tapatalk

Almost...at...speed...limit... Aww, brake lights..

Triesandluth

  • Hero Member
  • *****
  • Posts: 813
  • Getting it, a mile per hour at a time
    • View Profile
Re: PHBG installatin help please
« Reply #89 on: July 22, 2015, 04:24:36 AM »
Been a while... How's it coming?

Sent from my XT1080 using Tapatalk

Almost...at...speed...limit... Aww, brake lights..

An Error Has Occurred!

Call to undefined function split()