« previous next »
Pages: [1]

Author Topic: Metzeler tire construction  (Read 2482 times)

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Metzeler tire construction
« on: July 03, 2015, 04:36:13 PM »
Could anyone steer me to find just exactly what is the construction of FeelFree scoot tires?

Karl
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: Metzeler tire construction
« Reply #1 on: July 03, 2015, 04:39:11 PM »
Rubber, lots of rubber, and some metal in there too. Maybe some Kevlar, science is cool.
Logged
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

2wheelfun

  • Hero Member
  • *****
  • Posts: 710
    • View Profile
Re: Metzeler tire construction
« Reply #2 on: July 03, 2015, 05:00:39 PM »
Logged

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Re: Metzeler tire construction
« Reply #3 on: July 03, 2015, 07:04:31 PM »
I finally broke down on my hands and knees and at least read the sidewall: Tread-3 plies polyester + INL, Sidewall-3 plies polyester. This suggests a braced tread. Not radial. Also no steel. OK, how 'bout compounds? Is the center of the tread a harder compound for wear? Edges softer for adhesion? I cannot seem to find anything on the web besides marketing platitudes. Shoulda done this BEFORE I bought 'em! Hey! They still handle better than the oem Maxxis!

Karl

And thanx for the replies!
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

2wheelfun

  • Hero Member
  • *****
  • Posts: 710
    • View Profile
Re: Metzeler tire construction
« Reply #4 on: July 04, 2015, 02:49:43 AM »
Logged

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Re: Metzeler tire construction
« Reply #5 on: July 04, 2015, 08:25:37 PM »
Thanks, 2wheel, been there. Unfortunately it does not state which construction applies to the FeelFree. I conclude it is "bias belted." I want THEM to say that somewhere. Guess I better not hold my breath, huh?

Karl
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Re: Metzeler tire construction
« Reply #6 on: July 06, 2015, 02:17:39 PM »
Got a partial answer from Metzeler: radials in 120/70R-15 (front), 160/60R-14 and 160/60R-15 (rears) only. All the rest are bias ply. Re-asked the question about harder compound in center of tread. Will advise.

Karl

PS: Got the rest of the answer: the Feelfree is a single compund tire. Which means I will have to replace an expensive rear tire in another 8k miles.....
« Last Edit: July 06, 2015, 03:15:50 PM by CROSSBOLT »
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

Jeopardy4100

  • Jr. Member
  • **
  • Posts: 61
    • View Profile
Re: Metzeler tire construction
« Reply #7 on: July 07, 2015, 05:09:05 AM »
Since you brought it up....who does make a multi-compound tire?  I would be looking for Front 150/70-15 Rear 150/70-14.
Logged

Budz

  • Full Member
  • ***
  • Posts: 118
    • View Profile
Re: Metzeler tire construction
« Reply #8 on: July 07, 2015, 02:01:59 PM »
I have them on my GT300i, it's a great tire!
Logged

RubenC

  • Full Member
  • ***
  • Posts: 156
    • View Profile
Re: Metzeler tire construction
« Reply #9 on: July 08, 2015, 03:36:44 AM »
I am on my third set of Metzeler tires.  I just like the way they roll and grip the road.  I thought of getting Michelin's for about a minute.  After the minute, I thought why should I get a different tire brand if I was very happy with my Metzelers.
Logged
From the Great Nation called Texas. Oops I mean the Great State called Texas

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Re: Metzeler tire construction
« Reply #10 on: July 08, 2015, 01:24:26 PM »
Ruben, how many miles do you get on the rear Metzeler before you have to replace it? I, too, like the handling of the Metz!

Karl
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

RubenC

  • Full Member
  • ***
  • Posts: 156
    • View Profile
Re: Metzeler tire construction
« Reply #11 on: July 09, 2015, 04:06:27 AM »
I get about 8,000 miles on the each tire before replacing them.  I use my Downtown for work.  I ride about 200-300 miles a week.
Logged
From the Great Nation called Texas. Oops I mean the Great State called Texas

An Error Has Occurred!

Call to undefined function split()
Back