« previous next »
Pages: [1]

Author Topic: Cracking plastic body panels....  (Read 1217 times)

ScooterLar

  • Full Member
  • ***
  • Posts: 229
    • View Profile
Cracking plastic body panels....
« on: July 18, 2015, 04:13:06 PM »
Anyone else experiencing cracking body panels on their Like 200? I've already replaced the lower left side panel twice for cracking. Now it's developed a crack in the upper left side body panel (above the button for the rear foot peg). It seems that the plastic they use for these body panels is just too brittle.
« Last Edit: July 18, 2015, 04:18:47 PM by ScooterLar »
Logged
2005 Grand Vista
2006 Vespa LX 150
2009 Grand Vista
2006 People 250
2013 Like 200
2013 Like 200 LX
2012 Genuine Buddy 170i
2009 Genuine Buddy 125

Vintage MX

  • Newbie
  • *
  • Posts: 37
    • View Profile
Re: Cracking plastic body panels....
« Reply #1 on: July 18, 2015, 05:21:28 PM »
Strange.  I had two Likes, a 2011 and a 2013.  Plastic was fine in both of those.
Logged
2011 Like 200i, 2002 KTM 200 EXC and a garage full of 1970s Motocrossers and Trials Bikes.

big blue

  • Hero Member
  • *****
  • Posts: 1183
    • View Profile
Re: Cracking plastic body panels....
« Reply #2 on: July 18, 2015, 08:30:20 PM »
Nothing on mine three years and 6500 miles.
Logged
2012 Kymco Like 200i LX (Sold)  Salem, Oregon USA

TroutBum

  • Hero Member
  • *****
  • Posts: 1211
  • 2012 Like 200i (sold)
    • View Profile
Re: Cracking plastic body panels....
« Reply #3 on: July 19, 2015, 11:25:13 PM »
The attachment point tab by the left rear foot peg snapped on me and I was able to glue it back together with crazy glue. The vent just below the same foot peg broke loose and I reattached using silicon adhesive. Too many tabs and thin ones at that on the Like in my opinion. I am always concerned when I take the scooter apart I'll break a tab.
Logged

2wheelfun

  • Hero Member
  • *****
  • Posts: 710
    • View Profile
Re: Cracking plastic body panels....
« Reply #4 on: July 21, 2015, 04:13:16 PM »
Plastics are nice looking and light weight but do crack easily. In cold weather they get really brittle. In above pic I'd just live with that crack. If you drill a 1/16th in hole at the end of the crack it will prevent it from spreading, something to do with the physics of the hole being round it is stronger than the surrounding material.
Logged

ScooterLar

  • Full Member
  • ***
  • Posts: 229
    • View Profile
Re: Cracking plastic body panels....
« Reply #5 on: July 22, 2015, 01:14:53 PM »
Thanks, I'll do that.
Logged
2005 Grand Vista
2006 Vespa LX 150
2009 Grand Vista
2006 People 250
2013 Like 200
2013 Like 200 LX
2012 Genuine Buddy 170i
2009 Genuine Buddy 125

An Error Has Occurred!

Call to undefined function split()
Back