Ive been gone for a while.but my diy has been going!
3 weeks ago i decided i had enuf of my old long cleer wind braker
Sooo i started thinking and came up with a plan
All i needed was
1 16" car hub cap (plastic)
1 air pressure cutting tool
Several grade sanding paper
1 gloss black spray paint
I placed the plastic hub on the center line of the mask and lowerd it until i got the shape i had in mined
Then went over the shape with a thin black marker
And cut out the shape using the air tool
Then sanded the rough edge and painted black...
Before
After
All was going super well.and then 1 week ago i get on the xciting and... All the xcitment went away
I have a flat tire...
This was the point where i decided my tires are very old and worn out plus the air leak at the rear tire was from a patch made previously
So i went and bought 2 pirelli diablo scooter tires 150/70 r14 and 120/70 r15
And this is how my day lookd like
The teardown
Waiting to be replaced
New!!
No photos but a month ago i did a complete cvt overall sorry forgot to take picture...
Leo
Sent from my LG-D802 using Tapatalk
