My Setup so far ...

[Raindrop586]

Running a 70cc bbk malossi
95 jet in stock carb
Stock air box with couple extra little holes
Blue torque spring
Red clutch springs .
7.5 weights but i think 8.5 might be better ?

Running max speed of 55-58mph

Is this right setup . im still waiting on carb and intake . but
I wanna ride till comes .

[Triesandluth]

If you're not running lean then it's as right as it needs to be,  imo. 
Check out the way I modded my air box for ideas to open it up without going full open pod.  Just be prepared to upjet even more.  http://www.kymcoforum.com/index.php?topic=14121.0
Stock air box modification

Sent from my VS985 4G using Tapatalk

[Raindrop586]

Is that with filter in it or without ?

[Triesandluth]

I took the pictures without, but put it back,  of course. I'd never run far without!

Sent from my VS985 4G using Tapatalk

[Raindrop586]

What about a 3 inch tube with a pod filter . largest jet i have is a 95 gonna try it and cruise around here see what happens seems to idle and start fine . soooo fingers crossed cause it sounds extremely wicked now

[Raindrop586]

Ya only thing that runs right is a damn airbox . weird

[TheAmishSasquatch]

Go with a velocity stack like me 😊 with a helmet on, it's not that loud and it sounds bossasfuk!  < that's German 😜

[Triesandluth]

Ya only thing that runs right is a damn airbox . weird

Not big enough jets for open pod filter.  You'll seize if you try to run it like that. 

Sent from my VS985 4G using Tapatalk

[Triesandluth]

Go with a velocity stack like me 😊 with a helmet on, it's not that loud and it sounds bossasfuk!  < that's German 😜

I didn't know what a velocity stack was until just now. Google to the rescue.  I always assumed that my needle was too rich because of it's sputter after dropping back to half throttle from wide open.  Now I wonder if it's due to the mild ribbing in the tubing I used...

I'm gonna have to ask my German technician if he's familiar with that word.  I kinda like it.  It sounds similar to a word I tend to use lol

Sent from my VS985 4G using Tapatalk

[TheAmishSasquatch]

Make sure the velocity stack is goodentite < also German. 

[Raindrop586]

Who sells velocity stack ? And what is stock gear size ?

[Raindrop586]

What size jet with stack on ? I have stock carb . i just ported the intake to .

[TheAmishSasquatch]

I'm still dialing in my carb, but it's running pretty well on a 108 main. It still a little hesitant at 1/2 throttle  and accelerating out of a turn but at 1/4 and WOT it runs perfect. I think my idle jet is still a touch low. BTW I made my own velocity stack out of a piece of aircraft exhaust manifold l. You can buy them on ebay though.

[Raindrop586]

Ok ill try larger jet with air filter.


Still anyone know what atock gears are ?

Cause there is a 15/44
And 17/55 kit ... I want a wheelie machine im happy with 55mph

[Triesandluth]

Other Gears are for top speed. You might get an adjustable clutch,  high rpm clutch springs,  and make it kick in at a higher rpm to get wheelies.  Or really,  wheelies can be achieved already, most likely.  I just feel like mine is heavy. I've got white springs in a malossi delta.  If I got stiffer springs it would rise easier,  but I'm driving mine in instances where I already have enough problems keeping the front tire on the ground accelerating from a stop.  Makes left turns from a light interesting!

Sent from my VS985 4G using Tapatalk