Author Topic: Unrestricted but still restricted?  (Read 1375 times)

keith.brett1021

  • Newbie
  • *
  • Posts: 7
    • View Profile
Unrestricted but still restricted?
« on: November 16, 2015, 05:16:27 AM »
I have changed out the variator plus new rollers, unrestricted boss and a unrestricted cdi. However it only goes 38mph still? I read with those mods I should be able to hit 45-50mph.


Any help would be appreciated.

Thanks!

thebatman

  • Hero Member
  • *****
  • Posts: 2432
  • The Bat lives on... like the fkn Energizer Bunny
    • View Profile
Re: Unrestricted but still restricted?
« Reply #1 on: November 16, 2015, 05:22:53 AM »
I have changed out the variator plus new rollers, unrestricted boss and a unrestricted cdi. However it only goes 38mph still? I read with those mods I should be able to hit 45-50mph.


Any help would be appreciated.

Thanks!
Hey man, what rollers are you running??
Sounds.like you need to play with the rollers more and plus jet that carb........

Sent from my SM-N920P using Tapatalk

"THE BAT"MAN...
Says:
"A goal without a plan is just a dream"......

blue

  • Hero Member
  • *****
  • Posts: 3935
    • View Profile
Re: Unrestricted but still restricted?
« Reply #2 on: November 19, 2015, 03:40:39 PM »
Yes sir you need to up the jet to a 82 main jet.i

aaron8

  • Jr. Member
  • **
  • Posts: 88
    • View Profile
Re: Unrestricted but still restricted?
« Reply #3 on: December 28, 2015, 10:50:39 PM »
38 is normal with drive boss and 82 jet.

JJJoseph

  • Hero Member
  • *****
  • Posts: 879
  • Kymco Sento
    • View Profile
Re: Unrestricted but still restricted?
« Reply #4 on: March 26, 2016, 09:37:24 PM »
However it only goes 38mph still?

38mph is about all you'll ever get with those few mods.  Rollers will make no difference.  At 38mph, yer done!

motman

  • Newbie
  • *
  • Posts: 12
    • View Profile
Re: Unrestricted but still restricted?
« Reply #5 on: April 10, 2016, 09:41:53 PM »
44 mph is probably all you will achieve without a big bore kit to take it to 90 or 100cc. Variator weights won't make a lot of difference, try 5.5 to 6g. You will need a #88 main jet. Fit 2000 rpm clutch springs as well to get much better take off. Less than £5 for the set of 3. Is your air filter clean?

An Error Has Occurred!

Call to undefined function split()