« previous next »
Pages: 1 2 3 [4] 5 6

Author Topic: Derestricting your Agility CDI  (Read 36774 times)

premnas

  • Newbie
  • *
  • Posts: 27
    • View Profile
Re: Derestricting your Agility CDI
« Reply #45 on: May 29, 2010, 01:29:31 AM »
First post, and I wanted to tip my hat and say thanks...

I just bought a 2010 Agility 50 which, according to the speedometer, topped out at about 34/35 mph.  Cutting a notch in the CDI as shown in this thread gave me a 5 mph increase- I can now hit 40 mph on level ground.   There are a few other mods I've found here that I am looking forward to trying as well.

Thanks again- I really appreciate those extra miles per hour! They make a world of difference when you've got someone riding your butt and the throttle wide open...
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Derestricting your Agility CDI
« Reply #46 on: May 29, 2010, 01:39:21 AM »
No doubt!There are a lot of really cool people here just looking to make it good. The Agilities seem to out number all the other 50cc's BUT I   T Ink  'm Goin  thruuuu a   unnel. Ba d Recpti n.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: Derestricting your Agility CDI
« Reply #47 on: May 29, 2010, 01:46:07 AM »
...yeah we fire every other, but we last llllonngerrrrr.......


...Welcome to the Forum premnas!!

..you should change out, or machine the drive boss in your variator, and go up 2 sizes on your main jet in your carb...


..those are the first steps to hittin 45-50 mph, with these A50s...


...but first!!...how many km do you have on ur scoot??


peace
Logged
..every mod (action) necessitates a (reaction) mod..

premnas

  • Newbie
  • *
  • Posts: 27
    • View Profile
Re: Derestricting your Agility CDI
« Reply #48 on: May 29, 2010, 02:36:52 AM »
Thanks for the warm welcome!

It's not even broken in. 126 miles x 1.609 = 202.7km.  I've got my eye on a new clutch (drive ?) boss as discussed earlier in the thread, but I haven't looked into resizing the main jet.

It's a little too soon to be making any other mods, right?  The manual really stressed the importance of the break-in period, and I've tried to keep the speed down, really I have, but... Well, you know.

I think my expectations for a 49cc 4 stroke are pretty realistic- I would be happy if I could coax 45 - 48 mph out of her.  The Agility 50 is obviously an around- town commuter, but that would allow me to keep up with the flow of city traffic, for the most part.
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Derestricting your Agility CDI
« Reply #49 on: May 29, 2010, 02:46:55 AM »
If you're sure the scoot isn't a lemon... Do the mods, asap. You can break it in at the ranges it will be run. That is always a PLUS
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

premnas

  • Newbie
  • *
  • Posts: 27
    • View Profile
Re: Derestricting your Agility CDI
« Reply #50 on: May 30, 2010, 04:23:53 AM »
Well, the scoot seems pretty solid to me, fires right up every time and runs very smoothly from idle to full throttle.  It doesn't seem like a lemon...

Regarding a new clutch boss: For the time being, I'd rather just replace the bushing itself instead of the whole variator assembly, but  the places I've found online don't seem to list the derestricted variator bushing by itself.  I was hoping someone could point me in the right direction...?

EDIT:
N'mind, I kept looking and found what I was looking for!
« Last Edit: May 30, 2010, 04:29:37 AM by premnas »
Logged

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: Derestricting your Agility CDI
« Reply #51 on: May 30, 2010, 04:32:59 AM »
...persistance ever breeds success...

..post back with your results!!!


peace
Logged
..every mod (action) necessitates a (reaction) mod..

premnas

  • Newbie
  • *
  • Posts: 27
    • View Profile
Re: Derestricting your Agility CDI
« Reply #52 on: May 30, 2010, 07:00:10 AM »
I was wondering about this too:  I see these engine series numbers used a lot: 139QMB 157QMJ (GY6).

Does one of these describe the Agility 50?
Logged

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: Derestricting your Agility CDI
« Reply #53 on: May 30, 2010, 10:54:08 PM »
...my engine is a CK-139QMB-2..

..a variation of the gy6 engine...

..if you have CK50QT-5 printed on the top of your carburetor, then your engine is the same as mine..
Logged
..every mod (action) necessitates a (reaction) mod..

Miles000

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Derestricting your Agility CDI
« Reply #54 on: January 03, 2012, 11:36:24 PM »
I did the notch in my CDI and can't tell much.. I'm not sure if I cut deep enough though.. should I go a little deeper? Also I was thinking of buying a 19mm carb to replace the 17mm? carb.. would this help with speed or do I just need a larger jet? I don't know anything about messing with the clutch parts.. I bought my Agility 50 with 77km on it so I'm sure everything is stock. Also I am in the US so I don't know if everything is still restricted here or not. I am such a noob here so any advice will help :)
Logged

REDKYMCO

  • Full Member
  • ***
  • Posts: 142
    • View Profile
Re: Derestricting your Agility CDI
« Reply #55 on: January 04, 2012, 01:23:20 AM »
I dont think newer agility models have restricted cdi, they are mainly restricted by a washer in the variator after that anything else im more a modification than a derestriction, i personaly would just enjoy what you have for now and if you still want more than 40mph in a years time get a bigger scoot....
Logged
IF IT IS NOT BROKE DONT FIX IT:)

blue

  • Hero Member
  • *****
  • Posts: 3935
    • View Profile
Re: Derestricting your Agility CDI
« Reply #56 on: January 04, 2012, 03:35:08 AM »
Quote from: Miles000 on January 03, 2012, 11:36:24 PM
I did the notch in my CDI and can't tell much.. I'm not sure if I cut deep enough though.. should I go a little deeper? Also I was thinking of buying a 19mm carb to replace the 17mm? carb.. would this help with speed or do I just need a larger jet? I don't know anything about messing with the clutch parts.. I bought my Agility 50 with 77km on it so I'm sure everything is stock. Also I am in the US so I don't know if everything is still restricted here or not. I am such a noob here so any advice will help :)

I think the carbs on the agilitys are alreay a 19mm .I may be wrong but when I was going to buy a new one they where all 19mm.
Logged

Miles000

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Derestricting your Agility CDI
« Reply #57 on: January 04, 2012, 03:41:17 PM »
I forgot to metion my AG 50 even tho new was born on July 2008 :) I guess the other owner didn't love her the way I do.
Logged

Miles000

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Derestricting your Agility CDI
« Reply #58 on: January 04, 2012, 03:53:05 PM »
About the notch on the cdi, I cut till I saw what looked like just a single thread of copper.. very very small. Is that all it is?
Logged

Miles000

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Derestricting your Agility CDI
« Reply #59 on: January 04, 2012, 04:24:50 PM »
Quote from: kisbee on January 04, 2012, 01:23:20 AM
I dont think newer agility models have restricted cdi, they are mainly restricted by a washer in the variator after that anything else im more a modification than a derestriction, i personaly would just enjoy what you have for now and if you still want more than 40mph in a years time get a bigger scoot....

Yeah I was thinking of riding this one for about a year or so and save $$ then buy a bigger one next year or so. I just like the 50 cause no tag or insurence here in Ga.. which is great for me since I am poor..lol
Logged

An Error Has Occurred!

Call to undefined function split()
Back