What we used to do with dirt bikes and dual purpose bikes is get an old set of tires. Then put wood screws in them, from the inside out. The amount/pattern is left to your whim. Then mount the tire with a tube.
From personal experience - THIS WORKS GREAT. However. The tire will be horridly out of balance, and it isn't very kind to a bare, dry street.
My needs are very specific. As I said, we have snow here two times per year and it usually lasts for a total of 3-4 days.
For these occasions I want to be ready (because so far I always had to drive with regular tires on the snow!)
Therefore, I cannot change tires, use studs etc.
There are two sets in the picture above, one is for the front and the other for the rear wheel.