my zx50 issues

[art]

  If it aint broke don't fix it  The shim is for a little more gas just off idle. Get things back to what was working best last time it was up and running. Ride for awhile before changing anything and just one change at a time.
  Running a little ritch is good compared to the bone white plug chops you were getting  The pipe will probably change things a bit again

[thebatman]

what up??.. i have been measuring my very 1st port map. anyway, i have a real dumb ass ? for somebody... the port inline with the exhaust port would be .(the closest in size to exhaust port).the boost?. the pr of smaller ports to the side are ??.. transfer???... i have some small ass #s going on too.   dam ports are tiny on mine.           hey art, i done passed that again. i ported the intake some today.. got the ported cage AND intake on right now with my ritcher plug.

[art]

  Nice! take note if thing go tits up again ,you'll know what you did last. The shimm thing was for a little more on take off,may not be a factor now with the other mods.
  The ports are over my head,the jist i get is you want to match them the best you can and open the exhaust a bit to let things flow out of that jug 

[thebatman]

yeah, i think today was a blessin in MY tunning world.. ....i took a pic of my cap on the carb, if it will fit, I WANT IT....maybe word could post in carb thread for me...idk??.

[art]

  Cool still got your info,Ill try to grt a pic up tomorrow for you to look at. (Too buzzed tonight  )

[thebatman]

i emailed word the 2 pics i took of the cap...do wonder since ones a 14, that the cap would be smaller, buuut, i could use it for the parts scooters.....if i ever get it here, or just get the dam things..     im out, catch you tomorrow......

[wordslinger]

..th bat-pics...

[art]

  Woo hoo It looks right.The blow up pics go to hell  I'll send ya something with a measurment tommorow

[thebatman]

thanks word.....i tried to get a close up in the dark......dam shame, my air filter is bigger than my carb!!!!.    its true......

[art]

heres a pic

[art]

 It's rouphly 15/16 of an inch(the cap opening). The carb is a keihn pb It will run about $35 Total if you want it.

[thebatman]

hey art, i just measured mine...mine is 11/16in...(according to tape measure)..  .665in  (according to calipers).........so it may not be looking good..    it came off a ppl right???...hmmmm..

[sidthesloth]

Mate, take the carb, put your cable through the cap, make sure it is sealed and Bob's your uncle.

[wordslinger]

make sure it is sealed and Bob's your uncle

 

..what does that meeannn.....

[thebatman]

i was just wondering the same thing..... uncle bob, where ya been???