Author Topic: ..blown air induction 1.0 ..  (Read 6022 times)

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
..blown air induction 1.0 ..
« on: March 20, 2010, 08:37:55 PM »
..okay, so when the weather turned cold, my scoot began to run a bit lean in the mornings, while okay in the warmer afternoons...

..i up-jetted and fashioned a warm air induction to my filter that took care of the problem...

..now, with temp climbing into the 70's, i find that she's running rich...wanting to "fall on its face" at top speed WOT...

..so I said to myself I said, "self, why don't we just leave that big ol' jet alone and make her breath in some more air?"...

..scary thing is, I answered myself, but that's a whole 'nother issue...  ;D

..well, i remembered zombie and shaka talking about tapping into the fan's shroud and I said, "hhhmmmmmm..."

..so I resurrected the old stock airbox tubing, and with a lil trial and error fashioned me a blown air induction...

...yes i did.....where's sibi now, huh??

...the results are far better than I ever expected...

..gained acceleration speed, 3-4 mph on flat land and topped my fastest top end speed by 2 mph...

..now, the top end speed I previously had was ridng in a line of traffic with a 15 mph tail-wind...

...this run with the blower was same road...but by myself with a 2 o'clock headwind....

..overlook the electrical tape and cable ties, as this is still in it's proto-type stage....

..but it's soon gonna be a permanent, FREE performance enhancing mod!!
..every mod (action) necessitates a (reaction) mod..

Shaka

  • Hero Member
  • *****
  • Posts: 1660
    • View Profile
Re: ..blown air induction 1.0 ..
« Reply #1 on: March 20, 2010, 09:56:43 PM »
Wow!  That is too cool man!  Like a sort of supercharger!  That's pretty impressive that it gave that noticeable an increase in performance!

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: ..blown air induction 1.0 ..
« Reply #2 on: March 20, 2010, 10:06:54 PM »
...thanks man, yeah i was very suprised...

...i owe you and zombie a debt of gratitude...it was ya'lls idea..

...i just wanted to get rid of the rich condition....

..never woulda thunk it...

 :o
« Last Edit: March 20, 2010, 10:14:57 PM by wordslinger »
..every mod (action) necessitates a (reaction) mod..

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: ..blown air induction 1.0 ..
« Reply #3 on: March 20, 2010, 10:20:56 PM »
That is friggin Crazy Awesome!!! One note< that is unfiltered air. Get that sorted out, and I just may give the idea a try myself! 3ish mph for FREE. I love it!
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: ..blown air induction 1.0 ..
« Reply #4 on: March 20, 2010, 10:24:06 PM »
...yeah, free!!! i know right!!!

..and it's not unfiltered, i crammed a 3/4" npt brass muffler inside the tubing, and sealed around the hex with more electrical tape...

..every mod (action) necessitates a (reaction) mod..

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: ..blown air induction 1.0 ..
« Reply #5 on: March 20, 2010, 10:24:51 PM »
...every mph is a good one....

 ;D :D :) :D ;D
..every mod (action) necessitates a (reaction) mod..

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: ..blown air induction 1.0 ..
« Reply #6 on: March 20, 2010, 10:26:44 PM »
I going right now to look at what i have to set that up. Looks too cool to pass up.
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: ..blown air induction 1.0 ..
« Reply #7 on: March 20, 2010, 10:31:13 PM »
I going right now to look at what i have to set that up. Looks too cool to pass up.


..dude..it works!!!!
...the first time i tried it, was without the brass muffler inserted...
..that was waay too much air, stopped running as soon as i inserted the tube into the shroud...
..the muffler's i.d. is about 3/4"...so it acts as an orifice as well as a filter...

..oh, and the induction end of the tube, I scalloped the opening to create a kinda scoop inside the shroud...

..imma take pics of the pieces, parts etc., as i'm doing the final assembly..


 ;D
« Last Edit: March 21, 2010, 02:58:49 PM by wordslinger »
..every mod (action) necessitates a (reaction) mod..

Hoolander2

  • Hero Member
  • *****
  • Posts: 1180
    • View Profile
Re: ..blown air induction 1.0 ..
« Reply #8 on: March 21, 2010, 03:48:08 AM »
That's awesome!!  What's that fan for anyway?  Cooling? 

Kimcofan

  • Full Member
  • ***
  • Posts: 173
    • View Profile
Re: ..blown air induction 1.0 ..
« Reply #9 on: March 21, 2010, 01:29:54 PM »
Nice would have never thought of that, thats why I keep you guys around! haha

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: ..blown air induction 1.0 ..
« Reply #10 on: March 21, 2010, 02:17:27 PM »
That's awesome!!  What's that fan for anyway?  Cooling? 

..yup..engine cooling...and now air induction!!...lol..
..every mod (action) necessitates a (reaction) mod..

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: ..blown air induction 1.0 ..
« Reply #11 on: March 23, 2010, 12:16:25 PM »
...im loving this mod, guys....
..every mod (action) necessitates a (reaction) mod..

necapk

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: ..blown air induction 1.0 ..
« Reply #12 on: March 23, 2010, 07:59:39 PM »
Hello... :)

I have a Kymco Agility 50 from 2005.
I cant understand what modification did you done to you scoot???
Please take some pictures...

Thank you!!!

Sorry for my bad English...

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: ..blown air induction 1.0 ..
« Reply #13 on: March 23, 2010, 08:04:38 PM »
Hello... :)

I have a Kymco Agility 50 from 2005.
I cant understand what modification did you done to you scoot???
Please take some pictures...

Thank you!!!

Sorry for my bad English...


..don't sweat the english...the pics are on the first post of this thread...

 :o
..every mod (action) necessitates a (reaction) mod..

necapk

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: ..blown air induction 1.0 ..
« Reply #14 on: March 23, 2010, 08:20:03 PM »
ok

I didnt saw them

An Error Has Occurred!

Call to undefined function split()