stock scoot top speed

[Kimcofan]

Yeah dont worry too much there is a lot of helpful imput on the site and you might have a problem and just hearing everyone talking you will go DUH and a light bulb will appear over your head and you'll figure it all out!

[sticlistul]

I've done some searching and i will need a standard  or stas of 0.4mm for valve adjusting, put in the gap and adjusting until I can remove the standard , in this way i can't go under 0.4 and there's no risk .

[wordslinger]

I've done some searching and i will need a standard  or stas of 0.4mm for valve adjusting, put in the gap and adjusting until I can remove the standard , in this way i can't go under 0.4 and there's no risk .

.04mm not 0.4mm

[sticlistul]

Other question , in the attach picture is a hose marked by me in red , from that hose stream a brown substance with a foam which looks like cappuccino foam , it doesn't stream much just what is in that hose , it is normal that ?

[wordslinger]

Other question , in the attach picture is a hose marked by me in red , from that hose stream a brown substance with a foam which looks like cappuccino foam , it doesn't stream much just what is in that hose , it is normal that ?

...pic???

..see no pic...

 

[sticlistul]

i am verry sorry i forgot.

[wordslinger]

...yeah, that's just a condensate drain...you'll want to drain it every now and then...

..when you replace the stock airbox with a high-flow air filter it goes away...

 

[sticlistul]

rain doesn't smells like gasoline , also at your stock air filter it happens to find leaks of gasoline in the air filter ?

[wordslinger]

...it come back into the chamber from the carburetor..

..don't sweat it...it's normal...

 

[wordslinger]

...here's a link explaining what's happenning there...


"http://www.hdtalking.com/fuel_and_carb_related_issues/5089-why_is_there_fuel_coming_out_my_air_filter.html"

[sticlistul]

few updates =)) ,i've called my uncle to ask him what derestrct has done on the scoot (the scoot it's a gift from him ) and he told me just the boss from the variator is changed  ,he didn't touch the CDI ,now i have to take al 16 pages of topics to look at every cdi topics and see what I gave to do ... any pictures would hellp me very much ... i hope i will find some

[wordslinger]

  Derestricting your Agility CDI
« on: April 13, 2008, 06:34:35 AM » Quote 

--------------------------------------------------------------------------------

this allows you that your Agility runs 9000 rpm
just cut the CDI on a place shown on picture, there is a tiny copper wire which should be cut
Just be careful, do not cut too much

 

[sticlistul]

OK I've read enought tomorow i will do the cutting and see the changes when I go to faculty . Thanks wordslinger for information I hope that will go me up to 65 km\h . I hope I don't  forget to remove the tape off my air filter paper

[wordslinger]

...be SURE to remove that tape...i was still secretly suspecting your cdi all along...lol..

..you're gonna love it when you cut it!!!!...

..keep us informed of your progress!!



peace

[sticlistul]

yeeaa , I've done the cut it taked a minute... at 3 mm of cuting i've found it . I couldn't wait until tomorow so i've done it . i didn't ride the scoot but i've start the engine and i felt imidiately an increase of RPM . Tomorow i will see how fast it is . I'm not intersted to go very fast ,here in Romania even if the speed limit is over 60 km\h the roud don't let you to go faster it's full of pits .