« previous next »
Pages: [1]

Author Topic: how do you clean  (Read 1317 times)

Dark13

  • Full Member
  • ***
  • Posts: 152
    • View Profile
how do you clean
« on: March 30, 2010, 09:26:11 PM »
your air filter i am trying to figure out the best way to clean my (stock) air filter i have read in the manual you should use clean motor oil and ring out the excess but i don't see how you could
Logged
proud owner of a 2009 kymco agility 50

Kimcofan

  • Full Member
  • ***
  • Posts: 173
    • View Profile
Re: how do you clean
« Reply #1 on: March 30, 2010, 10:30:01 PM »
I would take a vacuum to it and shake it out real good.
Logged

joeboy

  • Full Member
  • ***
  • Posts: 107
    • View Profile
Re: how do you clean
« Reply #2 on: March 30, 2010, 10:44:11 PM »
If its a paper element filter you just blow it out with compressed air, if its a sponge type filter wash it in some petrol and let it dry off, then thin  a bit of 2 stroke or engine oil down with petrol and dip the filter in it squeeze it a little bit to get rid of the exess and leave to dry.

This will condition the filter after cleaning and the oil residue is better at trapping the dust in the air stopping it getting into the engine than just the dry sponge alone.
Logged

blue

  • Hero Member
  • *****
  • Posts: 3935
    • View Profile
Re: how do you clean
« Reply #3 on: March 31, 2010, 02:11:06 AM »
I have the sponge typ I always wash with a good dish soap rinse real good and let air dry and im all good.
Logged

axy

  • Hero Member
  • *****
  • Posts: 2210
    • View Profile
Re: how do you clean
« Reply #4 on: March 31, 2010, 09:21:34 AM »
You can also dip the paper element in the cleaning gasoline and put it aside to dry.
It looks like new afterwards.
Logged
---
Kymco People GT300i 2017 ABS Euro4
Kymco Agility 125 2008

(Past: Kymco People 250S, Piaggio Beverly 200, Kawasaki ZR-7S, Yamaha TW125, Kymco Cobra Cross 50, Peugeot Zenith 50, Piaggio NRG 50 mc2 72 cc Naraku kit)

joeboy

  • Full Member
  • ***
  • Posts: 107
    • View Profile
Re: how do you clean
« Reply #5 on: March 31, 2010, 12:26:30 PM »
You should oil the sponge filter after cleaning, even if its a quick spray of penetrating oil like wd40. They are designed to work this way.
Logged

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: how do you clean
« Reply #6 on: March 31, 2010, 08:28:07 PM »
...i clean my K&N with a spray electrical contact cleaner, then blow it dry and clean with compressed air...

..'course i have all that stuff at work, so it doesn't cost a thing...

..the contact cleaner does a super cleaning job...


peace
Logged
..every mod (action) necessitates a (reaction) mod..

Shaka

  • Hero Member
  • *****
  • Posts: 1660
    • View Profile
Re: how do you clean
« Reply #7 on: March 31, 2010, 11:19:22 PM »
I clean my K&N with a citrus based degreaser in the sink with warm water.  Let it dry and re-apply K&N filter oil.
Logged

sticlistul

  • Full Member
  • ***
  • Posts: 150
  • Sex, Scoot and Rock 'n' Roll
    • View Profile
Re: how do you clean
« Reply #8 on: April 02, 2010, 12:34:58 PM »
vacuum cleaner
before and after cleaning with a vacuum cleaner. I can't get better than this ...

You can see there the gas from the carb ... I really don't like this , but from what I read that's how it should be ...

What if i drill some holes in air filter  cap ?
Logged

An Error Has Occurred!

Call to undefined function split()
Back