Need wiring diagram for MXU 150

[86trizinger]

I need a wiring diagram for a MXu 150. I got a new GY6 engine but the stator harness is different. I don't have the original engine to swap parts on. Any help would be great.

[zombie]

Have you checked the general section under service manuals? All I have seen has it. If you need more help I will try to look a little deeper for you. It doesn't come up w/ a quick google.

[wordslinger]

..i searched for an hour for a service manual for the 150...

..found several for other cc, but not a 150....

[sidthesloth]

Maybe covered by one of the others?

[zombie]

Here's the 250cc.  http://pdftown.com/search/node/mxu+150   Perhaps you dan get what you need from there

[86trizinger]

Here is my problem.. I got a new engine but the stator wires don't match colors or connectors.

I need the stator wiring diagrams for the colors of the wires.
To be more specific. I have the pulser wiring figured out. On the stator side there is 3 wires of different colors then what I have. Every diagram I look at shows all yellow.

The new engine has these colors on the Harness:
white/red
White
Black

The harness has these colors:
Black/red
pink
yellow

Any help would be great.

[zombie]

The easiest way would be to do a resistance test on both stators. That will match up the outputs for you.

[86trizinger]

I don't have the original stator or I would just switch it over to the new engine

[zombie]

If it helps on the majorty of Kymco models, the white wire is the AC out to the regulator, the yellow is the lighting wire, and the black /red goes to the cdi. So the pink on your harness I assume replaces the white.