Recent post on spare valve cover gaskets started me thinking about my stocks of spare parts for my LIKE200i.
I guess I'm planning to keep it for a good while since I've collected so many new parts to use when needed.
All parts are OEM KYMCO parts from the kymcopartsmonster, buggy partsnw and bet&losin's shop:
3 belts (2 new)
coil
Spark plug lead and cap
NGK & DENSO Iridium plugs
2 or 3 Valve cover gaskets
injector
fully assembled clutch
clutch bell
Dr Pulley sliders and OEM rollers (13g & 14g)
oil screen,spring, O-ring and cap
main drain plug & washers
big nuts for both ends of CVT w/new washers
headlight, running, turn & tail light bulbs
orig nearly new Kenda tires
orig seat
battery (3 lightly used)
orig top case
orig mirrors
orig fuel pump & filters
full set of brake pads & new clips
caliper pins
dip stick
pair of exhaust nuts
several pounds of reclaimed hoses, wires, clips,bolts, screws, nuts, washers, etc. - from a parted-out eBay LIKE200i
...probably more, some place.
Just stuff I've slowly gathered over the past 3 yrs -
I ride it weekdays for @ 1.5 hrs. (the Burgman for w/e highway runs of @ 2.5 hrs)
This Chinese assembled scooter has fooled me with how few parts have failed - just the throttle position sensor (free under warranty). The seat, mirrors and top case & tires were replaced for comfort or perceived ride-safe reasons.
Pretty good scooter - esp. at the left-over prices that can be found these days!!
Stig