Author Topic: ...look out worrld...  (Read 64198 times)

art

  • Hero Member
  • *****
  • Posts: 1682
    • View Profile
Re: ...look out worrld...
« Reply #135 on: July 09, 2010, 05:25:11 AM »
I only show 50mph on the 2002 plus years ,but run a good inch and a half past at pegged,My sister picked up a 2009 new people 150 while I was down there(I'll have pics later)pretty sure here speedo will drop right in to a 50 with a 90+mph reading on the top,I got to have one!
Kymco peoples too many ;) I'm not an expert just a full time hobbiest.

art

  • Hero Member
  • *****
  • Posts: 1682
    • View Profile
Re: ...look out worrld...
« Reply #136 on: July 09, 2010, 06:29:25 AM »
O.K. check out this homless looking killbilly,we made it!
Kymco peoples too many ;) I'm not an expert just a full time hobbiest.

art

  • Hero Member
  • *****
  • Posts: 1682
    • View Profile
Re: ...look out worrld...
« Reply #137 on: July 09, 2010, 06:32:06 AM »
We instantly had a gang and picked up the lance charming It was hard to look at.
Kymco peoples too many ;) I'm not an expert just a full time hobbiest.

art

  • Hero Member
  • *****
  • Posts: 1682
    • View Profile
Re: ...look out worrld...
« Reply #138 on: July 09, 2010, 06:34:05 AM »
But the rider was alot easier on the eyes,Wife wouldn't let me keep her!
Kymco peoples too many ;) I'm not an expert just a full time hobbiest.

art

  • Hero Member
  • *****
  • Posts: 1682
    • View Profile
Re: ...look out worrld...
« Reply #139 on: July 09, 2010, 06:36:16 AM »
Some people think trunks are for slow old people,could still get my helmit in there  ;D
« Last Edit: July 09, 2010, 07:11:20 AM by art »
Kymco peoples too many ;) I'm not an expert just a full time hobbiest.

art

  • Hero Member
  • *****
  • Posts: 1682
    • View Profile
Re: ...look out worrld...
« Reply #140 on: July 09, 2010, 06:38:57 AM »
This was the worst part of the trip,private drag strip!
Kymco peoples too many ;) I'm not an expert just a full time hobbiest.

art

  • Hero Member
  • *****
  • Posts: 1682
    • View Profile
Re: ...look out worrld...
« Reply #141 on: July 09, 2010, 06:39:57 AM »
And no parts!!!
Kymco peoples too many ;) I'm not an expert just a full time hobbiest.

art

  • Hero Member
  • *****
  • Posts: 1682
    • View Profile
Re: ...look out worrld...
« Reply #142 on: July 09, 2010, 06:43:12 AM »
We do have a new Kymco convert though,My sister bought this after one ride on the people 50.
Kymco peoples too many ;) I'm not an expert just a full time hobbiest.

art

  • Hero Member
  • *****
  • Posts: 1682
    • View Profile
Re: ...look out worrld...
« Reply #143 on: July 09, 2010, 06:46:28 AM »
A 2009 with no miles p 150,check out the speedo if you can,I't will fit! $2300 I've been seeing them used for more.
« Last Edit: July 09, 2010, 06:48:15 AM by art »
Kymco peoples too many ;) I'm not an expert just a full time hobbiest.

art

  • Hero Member
  • *****
  • Posts: 1682
    • View Profile
Re: ...look out worrld...
« Reply #144 on: July 09, 2010, 07:13:45 AM »
It's late I'm out catch ya all later
Kymco peoples too many ;) I'm not an expert just a full time hobbiest.

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: ...look out worrld...
« Reply #145 on: July 09, 2010, 10:44:19 AM »
...woww...looks like ya'll had a blast....

..would like to run that drag strip....
..every mod (action) necessitates a (reaction) mod..

art

  • Hero Member
  • *****
  • Posts: 1682
    • View Profile
Re: ...look out worrld...
« Reply #146 on: July 09, 2010, 07:51:42 PM »
I knew you"d like the 2t,did you go to the stock spring.Mine with the 8.5gs in there was slipping the belt bad at take off then nearly wheely when it cought after the belt burned in for a few miles.I think the power we are creating is over driving the belt and variater.Might try the stocker again Do they sell a lighter spring?plus this new clutch has lots of options for adjustment.Too beat to do anything just yet!we are now in the 90s was 65 when i left.Where to begin left the shop in a mess.
Kymco peoples too many ;) I'm not an expert just a full time hobbiest.

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: ...look out worrld...
« Reply #147 on: July 09, 2010, 10:05:22 PM »
..with the 8.5s and the stock spring, i too experienced slippage..the first mile or so was awesome, then performance dropped off...

..couldn't get any torque...so i changed to 9 gram rollers and the 1000 torque spring...

..take-off suffers a bit... i don't have that super-quick take-off like before..

..but remember, i'm still kinda babying it, as i still have the split reed...

..before, with the 9 gram and 1000 spring, everything felt good...

.i'm going to stay with this setup until my reeds arrive, as it kinda keeps the engine's rpms down....
..every mod (action) necessitates a (reaction) mod..

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: ...look out worrld...
« Reply #148 on: July 09, 2010, 10:18:59 PM »
I think the power we are creating is over driving the belt and variater

..i've snapped 3 "stock" belts..

..two KYMCO branded Bando's and one Gates...

..i am NOT ever going to put another 23100 on this scoot...
..every mod (action) necessitates a (reaction) mod..

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: ...look out worrld...
« Reply #149 on: July 09, 2010, 10:20:38 PM »
..oh, and btw...

..i could LIVE in that scooter room....


 ;D
..every mod (action) necessitates a (reaction) mod..

An Error Has Occurred!

Call to undefined function split()