« previous next »
Pages: [1] 2

Author Topic: Dr Pulley sliders NO GOOD!  (Read 7691 times)

zevsdad

  • Jr. Member
  • **
  • Posts: 94
    • View Profile
Dr Pulley sliders NO GOOD!
« on: September 13, 2016, 08:22:17 PM »
Well I wanted to like them what with all the loose talk around these parts ---but.... here's the problem: THEY DON'T LAST!!!!! I changed out the factory rollers after around 2 years of happy, paper crunching noise -free riding. Well I can report that after a mere 7 months of riding the sliders that the paper crunching noise is back - and its WORSE THAN EVER. sorry about the caps shouting but I'm a little frustrated that after all that work the sliders only lasted 1/2 a year.

I ordered OEM rollers, brake pads, and a key spare from this place, with FREE shipping:

Chaparral Motorsports



I highly recommend it over kymco rip-off monster--where they actually have the balls to charge 20 bucks for shipping
Logged

boo

  • Hero Member
  • *****
  • Posts: 926
  • I hate censorship people manipulate you
    • View Profile
I don`t understand
« Reply #1 on: September 13, 2016, 09:31:25 PM »
Why some people have good luck with sliders and others do not. Most say the washers have to be installed in a certain way to prevent problems.
I installed Dr Pulley sliders about 3000 miles ago. So far, no problems.
Knock on wood.
Logged
300GTI black
Pro 2A - member GOA & NRA

de dee

  • Hero Member
  • *****
  • Posts: 2055
  • 2011 300i downtown 82,265 KM.
    • View Profile
Re: Dr Pulley sliders NO GOOD!
« Reply #2 on: September 13, 2016, 10:06:07 PM »
2011 downtown 300i       30,000 miles on one set of sliders and good for lots more 20/12   15 grams    if I can get my scale back from the pot smokers, I will weigh them next oil change,.  KILL THE KIDS!!THEY ARE IN THERE 30,S   I TELL THEM ITS MAKING THEM DUMB,. 
Logged

Yellow Jacket

  • Jr. Member
  • **
  • Posts: 98
    • View Profile
Re: Dr Pulley sliders NO GOOD!
« Reply #3 on: September 13, 2016, 10:33:52 PM »
    I installed stock weight Dr sliders and couldn't be happier. Can't say how many miles ago that was, but 2-3 thousand anyway. Yes I know, not a lot of miles but when you have 5 bikes licensed the Kymco has to wait it's turn to run up miles. I have hard numbers to show a marked improvement in acceleration, not just seat of the pants. Did the same with my  SYM HD200 but had no change in performance.
Logged
Scooter owned in the past, Honda Aero 125, '87 Elite 150 (2), '87 & '90 250 Elite, Yamaha 200, (2), 400 Majesty, Aprilia  Atlantic 500, Piaggio BV250,SYM HD200,  Kymco Yager GT200
Current ride, Kymco GTi 300

mrmike

  • Hero Member
  • *****
  • Posts: 748
  • Syuracuse, NY
    • View Profile
Re: Dr Pulley sliders NO GOOD!
« Reply #4 on: September 14, 2016, 09:30:07 PM »
I've had mine in for about 3500 miles with no problems. The increased performance made it a no-brainer for me.
Logged
Blue '23 People S 150i ABS  Moto Discovery GPS bar, Shad SH33 top case, Iridium spark plug, Black reflective graphics, Battery Tender ring terminal cable, LED tag light.         
Past rides- '73 Honda 450, '00 Harley Softail Deuce, '10 Kymco People 150, '12 Kymco GTI 300, '21 Kymco X-Town 300i ABS

Mr. Paul

  • Hero Member
  • *****
  • Posts: 1281
    • View Profile
Re: Dr Pulley sliders NO GOOD!
« Reply #5 on: September 15, 2016, 12:49:52 AM »
I have tried sliders and rollers. I went back to rollers. Sliders felt better but in real world tests did not perform better. The ramps are designed for round things. The scooters were engineered for round things. If you disagree with me that's fine, just don't be dissing my motor oil!  ;)
Logged
2009 Kymco People 150
1993 Honda Helix

agilebda

  • Sr. Member
  • ****
  • Posts: 409
    • View Profile
Re: Dr Pulley sliders NO GOOD!
« Reply #6 on: September 17, 2016, 09:40:14 AM »
Quote from: Mr. Paul on September 15, 2016, 12:49:52 AM
I have tried sliders and rollers. I went back to rollers. Sliders felt better but in real world tests did not perform better. The ramps are designed for round things. The scooters were engineered for round things. If you disagree with me that's fine, just don't be dissing my motor oil!  ;)

Strongly agree. The Dr Pulley sliders work better with the Dr Pulley variation.  Matching shapes!
I ordered the 14 gram 20×12 round rollers. Can't wait to see how they perform with a Zard exhaust.
« Last Edit: September 17, 2016, 09:42:35 AM by agilebda »
Logged

Mr. Paul

  • Hero Member
  • *****
  • Posts: 1281
    • View Profile
Re: Dr Pulley sliders NO GOOD!
« Reply #7 on: September 17, 2016, 10:26:35 AM »
Yep. If you look at the Dr. Pulley video, the variator is not a stock one. It is a Dr. Pulley that is designed for the sliders. Kind of misleading.
Logged
2009 Kymco People 150
1993 Honda Helix

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14692
  • Rural Ohio
    • View Profile
Re: Dr Pulley sliders NO GOOD!
« Reply #8 on: September 17, 2016, 11:18:59 AM »
Quote from: Mr. Paul on September 17, 2016, 10:26:35 AM
Yep. If you look at the Dr. Pulley video, the variator is not a stock one. It is a Dr. Pulley that is designed for the sliders. Kind of misleading.
I guess...but have Dr Pulley sliders in my Kymco and new Burgman 400...with stock cvt parts....work just fine.
Have not seen a dealer selling these sliders that mentions a problem using stock cvt parts.  Nor recall any forum mentions in Honda...Burgman sites stating the need for buying Dr Pulley variator in order to make the slide weights work without problems in a stock cvt.
Most just add these weights and button it up with good results.
I have.
Stig
« Last Edit: September 17, 2016, 11:23:40 AM by Stig »
Logged
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

Mr. Paul

  • Hero Member
  • *****
  • Posts: 1281
    • View Profile
Re: Dr Pulley sliders NO GOOD!
« Reply #9 on: September 17, 2016, 06:06:26 PM »
They worked fine for me too Stig. Just not overall as well as the Dr. Pulley round weights I put in. The sliders "felt" better but in objective testing did not perform better, for me anyway.
Logged
2009 Kymco People 150
1993 Honda Helix

Tromper

  • Hero Member
  • *****
  • Posts: 786
  • Seattlish
    • View Profile
Re: Dr Pulley sliders NO GOOD!
« Reply #10 on: September 25, 2016, 04:53:53 AM »
Heck, I put some stock weight ones in my S200 and the difference was notable.
Just going to get around to pulling them for a peek and a housing cleaning in the next week or so, but they went a long way towards killing the dead spot in acceleration along with fatter jetting.
Overall I'm a fan, at least on the S200, the other similar scoot I've worked on was the HD200 which was fine with the stock rollers, so can't say there.
Logged
2008 SYM HD200 "Niwanibiz"
2018 Suzuki Burgman AN650z "Bebaamaadizid"

k9 S200 (Blue) "Max" (Sold)
k8 SYM HD200 "Indigo" (Deceased)
k7 Suzuki Burgman 650 "Ohanzee" (Sold)

xsel777

  • Hero Member
  • *****
  • Posts: 670
    • View Profile
Re: Dr Pulley sliders NO GOOD!
« Reply #11 on: September 25, 2016, 10:22:08 AM »
I reported elsewhere on this forum that my sliders melted, and the outer variator face on my 500 stripped it's spline, so I will be staying away from them from now on.
I have ordered a malossi sports variator instead, and I will report my findings after a bit of a test.

 Sent from my Samsung Note 3 with Tapatalk
« Last Edit: September 25, 2016, 10:25:59 AM by xsel777 »
Logged
2010 Kymco Xciting 500Ri-Dark Blue

agilebda

  • Sr. Member
  • ****
  • Posts: 409
    • View Profile
Re: Dr Pulley sliders NO GOOD!
« Reply #12 on: September 29, 2016, 09:37:49 PM »
Quote from: xsel777 on September 25, 2016, 10:22:08 AM
I reported elsewhere on this forum that my sliders melted, and the outer variator face on my 500 stripped it's spline, so I will be staying away from them from now on.
I have ordered a malossi sports variator instead, and I will report my findings after a bit of a test.

 Sent from my Samsung Note 3 with Tapatalk

Let's us know how you find that Multivar 2000. I would be interested to see the performance difference.

Regards
Logged

xsel777

  • Hero Member
  • *****
  • Posts: 670
    • View Profile
Re: Dr Pulley sliders NO GOOD!
« Reply #13 on: September 30, 2016, 04:13:11 AM »
Agilebda, I have already started a new thread on the multivar.

 Sent from my Samsung Note 3 with Tapatalk
Logged
2010 Kymco Xciting 500Ri-Dark Blue

agilebda

  • Sr. Member
  • ****
  • Posts: 409
    • View Profile
Re: Dr Pulley sliders NO GOOD!
« Reply #14 on: October 01, 2016, 05:01:43 AM »
Quote from: xsel777 on September 30, 2016, 04:13:11 AM
Agilebda, I have already started a new thread on the multivar.

 Sent from my Samsung Note 3 with Tapatalk

I cant seem to find the thread anywhere. How did the Multivar work compared to the OEM?
Logged

An Error Has Occurred!

Call to undefined function split()
Back