Time for Mods - Whats the best? Variator, pulley, wheelies etc etc

[ScooterBroGuy]

Ill keep this short and sweet.
20,000km Service Due in 500km   - 20,000km = 12,000mile.
My 2013 Downtown 300i is 100% stock.

I do wheelies on my downtown, it struggles, i want more power / acceleration out of it

Whats the best of the best to gain acceleration, power

i dont wanna spend more then $800 on mods.

Cheers
Pete from melb

[Snorvey]

I'd buy a different bike.

[kneeslider]

You're doing wheelies on a DT?

What are you smoking, because I want some too.

[ScooterBroGuy]

You're doing wheelies on a DT?

What are you smoking, because I want some too.

yeah i figured them out the other day, normally i can wheelie scooters no issue however the downtown illuded me for awhile due to its heavy cumbersome power to weight ratio. i essentially stand on the passenger pegs to bounce the wheelie up while dragging a bit of rear brake, then once its up, it wheelies.
i just wanted to know whats the best  variator and pullies to get to squeeze some more acceleration out of the scoot.

[xsel777]

I favor malossi sports  variator and malossi sports clutch.

 Sent from my Samsung Note 3 with Tapatalk

[Snorvey]

You could always get yourself a fat girlfriend and stick her on the pillion?

[de dee]

you could try lighter dr pulley sliders   twelve  or 13 gram   Wt. that will keep the RPM up ,.at low speed, seems to me someone tried 11 gram sliders a few years back.  they popped center out and grind a gram or two off  ,  watch it only comes out one side,  you will need your weed scales!
 and I used a belt sander with fine 400 belt for the grinding,

[kneeslider]

I'd love to see a video with a DT on his rear wheel.

[Snorvey]

Don't encourage him.

[kneeslider]

I am still not convinced a stock 300 DT would lift its front wheel by bouncing the front up, loading the rear with weight, applying the rear brake ( WTF was this?).

[deedah37]

Dr pulley HIT clutch
14 gram dr pulley sliders
     Or
13 gram dr pulley sliders.

[CROSSBOLT]

Get a Kawasaki Ninja or whatever. Get a motorcycle with lotsa power. All the scoot sport needs is for someone doing wheelies on public streets. Bad enough car people cannot see either motorcycles or scoots it is worse that they see one ridden like a unicycle. It is instant hate towards all who ride on two wheels.

That's enough. I think he's got it! The IDEA! I think he has gotten the message! Do I have to draw a picture?

Karl

[Goodrich]

I have 12g sliders, definately feel stronger acceleration.

[de dee]

You're doing wheelies on a DT?

What are you smoking, because I want some too.

in china you can see them doing wheelies ,they stand on the top box bracket , they would have to beef it up , to do that.,

[agilebda]

Ill keep this short and sweet.
20,000km Service Due in 500km   - 20,000km = 12,000mile.
My 2013 Downtown 300i is 100% stock.

I do wheelies on my downtown, it struggles, i want more power / acceleration out of it

Whats the best of the best to gain acceleration, power

i dont wanna spend more then $800 on mods.

Cheers
Pete from melb

All honesty. Ive tried the Dr Pulleys and they are not that all cracked up to be. Just changed sliders recently and 3 of them shifted position in the variator housing. I have come to the conclusion that the sliders are not meant to be inside a variator which is made for round shaped rollers.
I decided to purchase the original shaped rollers 20*12 in size and 14 gram in weight. They run much better than the dr pulleys. The low end still has torque and speed on the low end is not flattened out. I just love them. The top end remains the same and higher torque on the top end at 150 kph.
This is just my opinion and findings guys. 
Here's the link to the ones I purchased: http://www.ebay.com/itm/400922422501?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT