Author Topic: Uxv 450i steering bushing  (Read 2172 times)

Rindy991

  • Newbie
  • *
  • Posts: 4
    • View Profile
Uxv 450i steering bushing
« on: January 12, 2017, 03:51:32 PM »
Anyone else have an issue with the bushing under the steering wheel for the steering shaft going into the column? 2 me it looks like a 1 piece neoprene bushing with a washer collar all 1piece. There is no set screw or c-clip to hold it down. Every few days it works its way out and I have to pull the steering wheel and push it back in. Any ideas

de dee

  • Hero Member
  • *****
  • Posts: 2055
  • 2011 300i downtown 82,265 KM.
    • View Profile
Re: Uxv 450i steering bushing
« Reply #1 on: January 12, 2017, 06:40:20 PM »
 I would check the parts list to see if there is a clip missing or a locking nut,.   

de dee

  • Hero Member
  • *****
  • Posts: 2055
  • 2011 300i downtown 82,265 KM.
    • View Profile
Re: Uxv 450i steering bushing
« Reply #2 on: January 12, 2017, 07:03:15 PM »
I would check the parts list to see if there is a clip missing or a locking nut,.
  tried to find parts list for your atv ,  I did not see one,.  for my scooter supply place has a good picture of all pieces,. 


airshot

  • Hero Member
  • *****
  • Posts: 1164
    • View Profile
Re: Uxv 450i steering bushing
« Reply #4 on: January 12, 2017, 11:49:48 PM »
   Cyclepedia and Kymco USA also has a part finder option on their website.

airshot

  • Hero Member
  • *****
  • Posts: 1164
    • View Profile
Re: Uxv 450i steering bushing
« Reply #5 on: January 13, 2017, 07:05:19 PM »
    Just viewed the parts diagram on cyclepedia, appears to be a "bushing" as they call it but no way to hold it in place, it looks like it is sandwiched between the wheel and column.  Just looked into the service manual and it shows the bushing just sitting there with the steering wheel on top held in place with a washer and a flange nut.

airshot

  • Hero Member
  • *****
  • Posts: 1164
    • View Profile
Re: Uxv 450i steering bushing
« Reply #6 on: January 13, 2017, 07:07:27 PM »
Anyone else have an issue with the bushing under the steering wheel for the steering shaft going into the column? 2 me it looks like a 1 piece neoprene bushing with a washer collar all 1piece. There is no set screw or c-clip to hold it down. Every few days it works its way out and I have to pull the steering wheel and push it back in. Any ideas

From looking at the manual, I guess I don't understand where the bushing can go, perhaps you have a pic or something to help me see what you have. I have the service manual so if I can see what you mean I might be able to help you out.

Rindy991

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Uxv 450i steering bushing
« Reply #7 on: January 16, 2017, 10:03:15 AM »
When it pops out agian I'll take a pic and show what i have going on there. The bottom of the steering wheel doesn't sit on it there for doesn't hold it in.

airshot

  • Hero Member
  • *****
  • Posts: 1164
    • View Profile
Re: Uxv 450i steering bushing
« Reply #8 on: January 16, 2017, 07:00:48 PM »
When it pops out agian I'll take a pic and show what i have going on there. The bottom of the steering wheel doesn't sit on it there for doesn't hold it in.

I am very curious as the manual shows it sandwiched in between the steering wheel and a step on the column. Have you ask your dealer about this?  Still under warranty?

Driemeyer25

  • Full Member
  • ***
  • Posts: 144
    • View Profile
Re: Uxv 450i steering bushing
« Reply #9 on: January 19, 2017, 01:11:45 AM »
I think if you put a spacer between the bushing and the steering wheel then it won't come out.

An Error Has Occurred!

Call to undefined function split()