« previous next »
Pages: [1]

Author Topic: 3500 wheel star moving  (Read 1593 times)

hieumait

  • Newbie
  • *
  • Posts: 25
    • View Profile
3500 wheel star moving
« on: May 17, 2017, 09:17:54 AM »
Hi, all my super 9 lc, wheels star moving around 3500 rpm, is my clutch slipping or clutch spring too stiff, I took cvt cover off and didnt see any dust, shoes is glaze surface, what r u guy suggest, thank
Logged

paceneedsstides

  • Hero Member
  • *****
  • Posts: 653
  • Cuz I can't drive...55!!...No I mean that I try...
    • View Profile
Re: 3500 wheel star moving
« Reply #1 on: May 17, 2017, 08:50:24 PM »
thats not an issue
Logged
2013 Kymco/Malossi Like 70 2T
Technigas Next R Chrome exhaust
Malossi Dellorto 19mm Carb
94 main jet
Malossi Multivar
Dr Pulley 6gr Sliders
Malossi Blue Rear Pulley Spring
Malossi Torsion controller
Stage 6 Sport Pro Clutch
Stage 6 upgear kit
Malossi PHBG Open Racing Filter Chrome Covered

Mr. Paul

  • Hero Member
  • *****
  • Posts: 1281
    • View Profile
Re: 3500 wheel star moving
« Reply #2 on: May 17, 2017, 09:36:50 PM »
Sounds like the springs are too stiff, it they are not the originals. Also check for wear on the clutch pads.
Logged
2009 Kymco People 150
1993 Honda Helix

hieumait

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: 3500 wheel star moving
« Reply #3 on: May 18, 2017, 08:34:36 AM »
clutch pads look good
Logged

Mr. Paul

  • Hero Member
  • *****
  • Posts: 1281
    • View Profile
Re: 3500 wheel star moving
« Reply #4 on: May 18, 2017, 08:14:12 PM »
Quote from: hieumait on May 18, 2017, 08:34:36 AM
clutch pads look good


If the clutch springs are not the originals, I would replace them.
Logged
2009 Kymco People 150
1993 Honda Helix

gctkaz

  • Newbie
  • *
  • Posts: 28
    • View Profile
Re: 3500 wheel star moving
« Reply #5 on: June 21, 2018, 04:42:56 PM »
I just picked up a 2006 LC, took me almost 5 hours to drive it home!

On mine, the clutch doesn't grab until about the engine is at 5000 rpm, and I'm pretty much redlining it at takeoff. Low speed manoeuvres are are tricky, but the top end is all there and the speedo needle can go past 80 km/h :o. I'm fairly certain some tuning has been done by the previous owner, as it has some kind of Technigas exhaust installed. The clutch springs might be way too stiff. Before I go order stuff, does anyone know if this clutch is compatible with GY6/139QMB springs?
Logged

An Error Has Occurred!

Call to undefined function split()
Back