Author Topic: New Member  (Read 1500 times)

DennyB

  • Newbie
  • *
  • Posts: 7
    • View Profile
New Member
« on: July 07, 2017, 04:01:39 PM »
Hello all,
Just wanted to say and introduce myself.
Have been riding 2 wheelers since I was 14 (I'm now 56).
Everything from big twins, dirt bikes, Smaller bikes and scooters.
My last scooter was a Chinese 50 and was looking to upgrade.
Well, I was in a wreck with it and it forced the upgrade sooner than later.

Decent 50s are hard to find around here but I happened on a clean 08 People 50 2-stroke.
It Has been modified with (according to the previous owner) After market exaust, High performance valves (I have no idea what type) and has been re-jetted.
The work was done to the bike prior to the previous owner.

It gets to 30mph very quickly and continues to pull past 50mph. It may go faster but I was speeding at this point and really didn't want to over rev it.
I really like the way it handles with the 16" wheels. It's a slight bit motorcycle like.

Everyone on the forum seems really cool and respectful, and there is a wealth of knowledge here I'm sure will come in handy!

Anyway, Thanks for having me.
Denny

MJR

  • Hero Member
  • *****
  • Posts: 1141
    • View Profile
Re: New Member
« Reply #1 on: July 07, 2017, 04:12:08 PM »
Welcome aboard.
'03 Clipper Yellow Honda Reflex
'03 Coast Cyan Atlantic 500
'14 White MyRoad 700i
'09 Mirage White Burgman 650
'06 Oort Gray Burgman 650 project
'05 Sonic Silver Burgman 650 project
'03 Space Blue Burgman 650, rebuilt/upgraded CVT w/Polish adapter
'03 Space Blue Burgman 650 parts bike

ole two wheels

  • ole two wheels
  • Hero Member
  • *****
  • Posts: 747
    • View Profile
Re: New Member
« Reply #2 on: July 07, 2017, 04:26:38 PM »
Yes DennyB, a warm welcome to the Kymco Forum. You can find answers to just about any Kymco question you might have, here. Great bunch of folks on this site. Glad to have you.
Mac 

2012 Kymco DT300
1996 Honda Shadow Spirit 1100

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7763
  • West Tennessee, USA
    • View Profile
Re: New Member
« Reply #3 on: July 07, 2017, 07:14:58 PM »
Welcome, Denny! SOMEONE here has an answer for whatever your question. Some of us don't sleep at night for fear something will be fogotten! Well, sort of......!

Karl
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

boo

  • Hero Member
  • *****
  • Posts: 926
  • I hate censorship people manipulate you
    • View Profile
a warm
« Reply #4 on: July 07, 2017, 07:55:09 PM »
welcome to you.
300GTI black
Pro 2A - member GOA & NRA

big blue

  • Hero Member
  • *****
  • Posts: 1183
    • View Profile
Re: New Member
« Reply #5 on: July 07, 2017, 08:36:58 PM »
Welcome to the group Denny!
2012 Kymco Like 200i LX (Sold)  Salem, Oregon USA

souzamoto

  • Sr. Member
  • ****
  • Posts: 383
    • View Profile
Re: New Member
« Reply #6 on: July 08, 2017, 12:35:18 AM »
High Performance Valves? In a 2 Stroke? Ummmm...OK

ronigj

  • Jr. Member
  • **
  • Posts: 75
    • View Profile
    • Super 8 Philippines Motorcycle, Club Inc.
Re: New Member
« Reply #7 on: July 08, 2017, 01:10:35 AM »
Welcome!

Sent from my SkyFire 2 using Tapatalk


DennyB

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: New Member
« Reply #8 on: July 08, 2017, 11:42:30 AM »
High Performance Valves? In a 2 Stroke? Ummmm...OK

I was un familiar with that as well?
I imagine its possible.  IDK
I have been wrenching a long time but have very little internal experience on a 2 stroke.

Redk

  • Hero Member
  • *****
  • Posts: 530
    • View Profile
Re: New Member
« Reply #9 on: July 08, 2017, 12:13:01 PM »
Hi Denny,
There's a lot of fun stuff going on here and we like challenges.  :-)

I'm curious about those high performance valves, too.

I never had a Kymco 50...
It must have a modified engine with reed valves for crankcase induction and many other performance parts to get that sort of speed.
Sounds like you got a good one !

Always better to avoid those crashes...
redk

Mr. Paul

  • Hero Member
  • *****
  • Posts: 1281
    • View Profile
Re: New Member
« Reply #10 on: July 08, 2017, 07:43:41 PM »
Welcome Denny!
2009 Kymco People 150
1993 Honda Helix

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14690
  • Rural Ohio
    • View Profile
Re: New Member
« Reply #11 on: July 09, 2017, 01:18:18 AM »
Welcome  Denny !

Yep, respect for one another is first priority....then we talk scooters and riding.
Pleased that that came through to a new member.
A little lying about top speeds, our weight, age and MPG's comes next ;-)
Again, welcome.
Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

Mr. Paul

  • Hero Member
  • *****
  • Posts: 1281
    • View Profile
Re: New Member
« Reply #12 on: July 09, 2017, 02:22:53 AM »
Welcome  Denny !

Yep, respect for one another is first priority....then we talk scooters and riding.
Pleased that that came through to a new member.
A little lying about top speeds, our weight, age and MPG's comes next ;-)
Again, welcome.
Stig





I am 29 years old, an athletic 165 lbs, and my People 150 goes 85 MPH uphill sir! And I never lie.  ;)
2009 Kymco People 150
1993 Honda Helix

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14690
  • Rural Ohio
    • View Profile
Re: New Member
« Reply #13 on: July 09, 2017, 11:12:07 AM »




I am 29 years old, an athletic 165 lbs, and my People 150 goes 85 MPH uphill sir! And I never lie.  ;)
Have you had to refuel yet?
I'm  at 4 yrs so far, still showing half a tank.
(Thinking about asking Kathy to the Prom. Wish me luck!)
Stig
« Last Edit: July 09, 2017, 11:16:01 AM by Stig »
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

Mr. Paul

  • Hero Member
  • *****
  • Posts: 1281
    • View Profile
Re: New Member
« Reply #14 on: July 09, 2017, 05:45:46 PM »
Have you had to refuel yet?
I'm  at 4 yrs so far, still showing half a tank.
(Thinking about asking Kathy to the Prom. Wish me luck!)
Stig



 ;D ;D ;D
2009 Kymco People 150
1993 Honda Helix

An Error Has Occurred!

Call to undefined function split()