movable drive face bushing direction

[poochar]

Hello,
Had my transmission apart today to try out Dr. Pulley sliders....
When I removed the movable drive face bushing I did not pay attention
to the direction (thought it fit either way)
On reassembly I noticed there is a sleeve (or machined that way) on the
inside of one half of the bushing.....
Can someone please tell me what side goes where (or does not matter)

Thanks,
Eric

[de dee]

look at the bottrm of dr pully box

[poochar]

Looking at bottom of box of the Dr.Pulley box reveals orientation of the sliders
(that I understand)
I am asking about the cylindrical bushing that slides into the center of the movable variator face.
(it is not symmetrical in the inside)

Thanks,
Eric

[Mr. Paul]

If it has splines, they go towards the outside away from the scooter. If it does not have splines, it does not matter.