Author Topic: Agility 50 start problem  (Read 1097 times)

Pinchy1111

  • Newbie
  • *
  • Posts: 3
    • View Profile
Agility 50 start problem
« on: September 14, 2017, 01:04:04 AM »
Hi everyone this is my first post here.
Ive had my kymco about 3 months and it was going great but one the electric start stopped working.
I bought a new solenoid still nothing. I took the starter motor off and tested it with a battery and that worked. So wjat other possibilities are there? Ive put a multimeter on my battery terminals and it seems to shows its charged and putting out enough. Anyone recommend anything would be great. Thanks!!

eamartin

  • Hero Member
  • *****
  • Posts: 550
    • View Profile
Re: Agility 50 start problem
« Reply #1 on: September 14, 2017, 10:35:13 AM »

What year?  How many miles?

Pinchy1111

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Agility 50 start problem
« Reply #2 on: September 16, 2017, 07:29:08 AM »
What year?  How many miles?

Its a 2013 with 12000 kms

eamartin

  • Hero Member
  • *****
  • Posts: 550
    • View Profile
Re: Agility 50 start problem
« Reply #3 on: September 16, 2017, 11:48:42 AM »
How old is the battery?  Have it load tested.  Is there a relay between the starter switch and the solenoid?  Can you do a test by-passing the starter switch and going directly from the battery to the solenoid?

Jp6940

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Agility 50 start problem
« Reply #4 on: September 25, 2017, 10:02:30 PM »
 Will  it kickstart ?
 If so I would check your  grounds

Pinchy1111

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Agility 50 start problem
« Reply #5 on: September 27, 2017, 09:24:31 AM »
Will  it kickstart ?
 If so I would check your  grounds

Yep still kick starts every single time no problems

JJJoseph

  • Hero Member
  • *****
  • Posts: 892
  • Kymco Sento
    • View Profile
Re: Agility 50 start problem
« Reply #6 on: October 13, 2017, 08:51:28 AM »
eamartin & Jp6940 have the right approach.  The culprit is likely in the wiring, maybe so obvious as the positive wire to the starter.

An Error Has Occurred!

Call to undefined function split()