A "jerk"from a dead stop...

[briandrum]

I'm pretty sure it has something to do w/ my throttle, but I have no idea where to begin.  When I'm at a dead stop and give her a little gas, she starts to go, then a second or 2 there's a small "jerk", then everything is fine...anyone have or had this problem?   Any ideas what it could be?

[art]

Too light a weight can cause this or contra spring.The belt and or clutch is slipping.I would think,have you done any mod?

[wordslinger]

I'm pretty sure it has something to do w/ my throttle, but I have no idea where to begin.  When I'm at a dead stop and give her a little gas, she starts to go, then a second or 2 there's a small "jerk", then everything is fine...anyone have or had this problem?   Any ideas what it could be?

...forgive me briandrum, but how many miles and what scoot?

[Calothrix]

If the scoot has a few miles on it, glazed over clutch pads could be causing your problem.  If so, take some emory paper to them and wipe the clutch bell off with denatured alcohol and you should be good to go.

[Shaka]

If the scoot has a few miles on it, glazed over clutch pads could be causing your problem.  If so, take some emory paper to them and wipe the clutch bell off with denatured alcohol and you should be good to go.

This!

[briandrum]

Haven't been here in a few days or so...sling, remember, I traded my guilty for a Super 8?  I'll give the other ideas a shot....thanks everyone!

[wordslinger]

..i'd agree with the clutch deal...

..i'd also go as far as to say that you might want to dis-assemble the clutch and lightly lubricate the clutches fly spring mechanisms...

..especially if there is any residue present within your clutch...clean it out with a good spray contact cleaner...

..belt wear and dust and clutch pad wear all create a dusty coating that can accumulete within your clutch, causing the pads to not all spring out at the exact same time...


..give it a shot!!

..cleaner is always better!!


peace

[thebatman]

i try to do this everytime i open her up.. especially the glazing....does make a difference..

[blue]

ya thats what my scoot is doing too. guess I better do some cleaning too. my scoot has 1500 miles but the clutch was new after 1100 miles does it sound like a cleaning time.

[thebatman]

i would...yeah, my oem clutch would glaze at nothing(this one is starting too)... i would clean whole cvt, check rollers while there....