Author Topic: Kymco Sento 50 VIN  (Read 836 times)

biddlemass

  • Newbie
  • *
  • Posts: 7
    • View Profile
Kymco Sento 50 VIN
« on: March 28, 2018, 05:48:42 PM »
Pulled off the VIN cover on the neck of my Sento 50 and there is no VIN stamped there.  >:(  There does not appear to be any scratching or removal of the VIN so I am wondering if there is somewhere else I can check...

It's not stamped on the engine or frame anywhere that I can find...

Thoughts?

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14692
  • Rural Ohio
    • View Profile
Re: Kymco Sento 50 VIN
« Reply #1 on: March 28, 2018, 06:26:05 PM »
Owner's manual does not show you?
On my Kymco LIKE200i I found the VIN where you looked, and also found it on a metal tag on frame by looking up under side body panel with a flash light. Showed VIN and month and year of manufacture.
Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

biddlemass

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Kymco Sento 50 VIN
« Reply #2 on: March 28, 2018, 06:55:31 PM »
It says it will be under the plastic VIN panel, but it was not there. It also doesn't show any signs of tamper or removal so that's why I am confused.

I've looked on most of the frame but can't seem to find anything...

Manual doesn't say much other than to check under the VIN panel. Will an engine block number work for title?

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14692
  • Rural Ohio
    • View Profile
Re: Kymco Sento 50 VIN
« Reply #3 on: March 28, 2018, 09:26:03 PM »
ok, i had to lay on back, with flashlight to find the silver tag with my scoot's birth date, and VIN. Way up under body panel.
Failing that, I'd use kymco web site to contact them with your question.
Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

JJJoseph

  • Hero Member
  • *****
  • Posts: 892
  • Kymco Sento
    • View Profile
Re: Kymco Sento 50 VIN
« Reply #4 on: March 29, 2018, 10:13:30 PM »
My VIN tag is under the arse end below the rear turn signal.  It's because the VIN has to be visible to the coppers, without the use of tools.

An Error Has Occurred!

Call to undefined function split()