Anyone have any experiences good or bad with these carbs?
I have a 2012 Kymco Super 8 50 2T
The scooter I own has a blown top end, replaced with a Naraku 70cc, previous owner modded the exhaust, it also had a K&N air intake.
I bought one and found out it was actually a stock 16mm, I got it to work but I have the idle screw all the way in and the fuel mix at 3 turns out just to get it to idle. I also had to adjust the float level to accept more gas, since the stock height it was set at was too high and the scooter was in fuel starvation mode.
Anyways I've ordered another 19mm carb and cross my fingers it works better than the one I have.
Can anyone here tell me what their approximate settings are for their carb I'm at Sea level in Raincouver BC Canada. When I bought my scooter also gave me a number of jets for the OEM carb 88,96,101,105 does anyone know if I can use these in the Ebay carbs?
****NEED a CENTER STAND for this Scooter PLEASE MSG ME IF YOU HAVE AN EXTRA ONE!!*****
Great forum thanks in advance!!
