My kitted 2003 People is dead (electrical)!

[art]

 my router is dying and the power has been spotty all day,somthing at one of the poles so i'm in and out. I'll catch it all up sometime 

[art]

 O.k latest round electrical is sorted. wasn't back to my top speeds though,so another bunch of cvt changes. Now running the green malossi contra,a set of dr. pully 9.5g and the 743 belt.
 This got me back to speed I can peg the speedo again(not quite as quik as before) and ran great the first 5 miles out stopped for some parts got back up to speed and starts shutting down again like it's out of gas at top speed wot  let off and runs fine. It's running a hair lean but with in talerence. Any thought's, carb to small,didn't seem to matter before. Major motor malfunction,seals bearings, crank.doesn't make any noise when this happens. Or another short only at high speed          Oh well I'll come up with something or put it on the shelf for awhile not like i don't have others to finish 

[thebatman]

uuuuuuuuummmm.............................yeah...    

[wordslinger]

...can you raise the float on your carb??

..on my a50 carb, the float is adjustable...

..it would allow more reserve fuel in your bowl...

[art]

 No its tied to the jet no adjuster,seems wierd not a problem utill this summer of corse I added a few more miles an hour around then,and cant tell if its tied to fuel or electrical maybe cobra cdi does have a limmiter and just started hitting it  Time to cut the oem cdi maybe.

[art]

 Well today my iridium plugs showed up and was not a big believer in them,Well now i am. Cold start not a problem any more and for the time being its not shutting down    Who would a thunk it,will have to put in some more time on it but quite impressed so far after about 30 miles and Pulled my test hill 3mph faster. I would suggest to anyone following this go get some about $9 at my local auto parts store. WOW!!! Ps. cut the 2009 oem cdi no wire in there till i hit the circuit board   

[thebatman]

Well today my iridium plugs showed up and was not a big believer in them,Well now i am. Cold start not a problem any more and for the time being its not shutting down Who would a thunk it,will have to put in some more time on it but quite impressed so far after about 30 miles and Pulled my test hill 3mph faster. I would suggest to anyone following this go get some about $9 at my local auto parts store. WOW!!! Ps. cut the 2009 oem cdi no wire in there till i hit the circuit board               from a plug??

[art]

 May be worth a shot. I'm not sure why the results but it's working. I've heard other people say there great,but didn't think much of it. maybe just lined up good.I don't know  Will be testing in my other soon.

[thebatman]

hmmm?   i had heard they were good plugs but like that???... was told not to use if doing tunning...you would in essensce ruin the plug, waste that $10,..

[art]

 I'm beyond the tuneing point at this moment Ha! but makes sense. I tried them back in my dirt bike days and did not see any benifit. In a round about way its showing me a problem or compensating for it. Thought it might be worth a try with the little 50cc motor for any boost and its working at the moment 

[thebatman]

now i had wondered about a bosch platnimum +4........lmao... may need ME one of those...i dont foul like i did before i know that much...lmao(well i do change pretty often now too.)

[wordslinger]

..i'm about ready to tear into my ppl..

..it's been sitting there, quietly waiting, longing for some attention...

..bless it's heart, i've been neglecting it since i figured th' guilty delima out...

..i've just had so much fun with the 4t since i opened the exhaust...

[thebatman]

WORD!!!..... whats up?, was wondering if you were stopping in this eve.

[art]

 At least you have a nice runner it will afford you some time to do it right ,Let me know when your ready i'll list what ever i have running that day on the bike   Opening the exhaust did make a difference on the s200,but i forgot i had changed the contra back to stock so no top speed runs today.(needed the green spring for the people)
  Still scratching my head over the plug change on the people,I've heard stories but wow it made quite a difference,we'll see how long it lasts. got to run catch ya all later.

[wordslinger]

..yeah, rough day..

..we pulled two 8" diameter, @20 ft long steel tie bars out of one of th diecasting machines today...

..about 3500 lbs each..one stuck about half way...

..and it was 110 degrees in that area of the plant....



..been lurking for a bit...