KymcoForum.com
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Welcome Kymco Owners!
Home
Help
Search
Login
Register
KymcoForum.com
»
Scooters - 50cc
»
Agility 50
»
Runs only wide open throttle bad
« previous
next »
Print
Pages: [
1
]
Author
Topic: Runs only wide open throttle bad (Read 655 times)
Ollison
Newbie
Posts: 1
Runs only wide open throttle bad
«
on:
March 31, 2019, 06:54:14 PM »
I have been A mechanic for years. I change the spark plug adjust to the valves replaced the carburetor supposedly pre-adjusted and it still acts the same. Starts when cold pretty good. When you run it it doesn’t quite open up. After that it’s down hill. Runs worse after warm up. It will not idle you want the idle screw turn all away again. I also changed your fuel filter. It’s seems to have compression. Cranking my it by hand is difficult testing compression. One unusual happening, that hasn’t happened for awhile is it seemed to be locking up when I tried to crank it. It’s in excellent shape body wise. What am I missing here. Yes it does pump gas fine.
Logged
CROSSBOLT
Hero Member
Posts: 7763
West Tennessee, USA
Re: Runs only wide open throttle bad
«
Reply #1 on:
March 31, 2019, 09:26:39 PM »
Too many questions: 1. Why replace carb? 2. Was carb replacement exactly like original? 3. Was original the correct part? 4. What clearances were valves set? 5. Why change spark plug? 6. What did original plug look like?
Logged
Karl
Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic
eamartin
Hero Member
Posts: 550
Re: Runs only wide open throttle bad
«
Reply #2 on:
April 01, 2019, 01:48:33 AM »
Staying with the carb theme: How a about a carb photo? Does the carb have the electric bystarter? How many turns out from seated is the slow jet screw? Does the carb have the stock filter set-up?
Logged
An Error Has Occurred!
Call to undefined function split()
Back