Author Topic: Gear Oil change  (Read 6922 times)

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14690
  • Rural Ohio
    • View Profile
Gear Oil change
« on: April 22, 2019, 04:15:43 PM »
Owner's manual schedule is @2500 miles between changes using 90# oil.
I do them about every 1000 miles.
Today used Valvoline full synth. 75/90W.
Removed a bit under 200ml. Poured the same into the cup, and injected like amount into the ol' LIKE200iLX.

I clean things up before starting....






Weapon of choice (works much better than cheap syringes I've tried)
That old felon Martha S. developed this while she was doing hard time. Thanks Marty!


One last thing - I never use a torque wrench on gear oil, engine oil, exhaust studs or spark plug changes.
I just use  a light touch, short ratchet & common sense.....
Stig



« Last Edit: April 22, 2019, 04:20:44 PM by Stig »
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

scooterfan

  • Hero Member
  • *****
  • Posts: 764
  • Durban, South Africa to Ankeny IA.
    • View Profile
Re: Gear Oil change
« Reply #1 on: April 22, 2019, 05:18:46 PM »
That oil coming from the drain hole (2nd last picture) still looks in very good condition ?

I bought my scooter 2nd hand and have no record of previous service record. I changed engine and gearbox oil just after I bought the scooter.
The engine oil was very dirty, but the gearbox oil was perfectly clean. I couldn't find any traces of moist or metal dust in the gearbox oil, so I thought I will  just change gearbox oil every 5000 km in future.

I assume  these gearboxes come with breather holes somewhere ?
 I couldn’t find a breather hole on my scooter’s gearbox, and my only concern is getting moist mixed with the gearbox oil due to condensation. I think if the oil level is correct at all times,  there should be no sign of metal dust in the oil during oil changes.

Life is a journey. Just spend some time, and enjoy the trip.

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7763
  • West Tennessee, USA
    • View Profile
Re: Gear Oil change
« Reply #2 on: April 22, 2019, 05:42:08 PM »
Kymco typically vents the gear box into the carb/throttle body side of the airfilter with a small formed rubber-like hose/tube. Usually at the rear of the air filter box.
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

scooterfan

  • Hero Member
  • *****
  • Posts: 764
  • Durban, South Africa to Ankeny IA.
    • View Profile
Re: Gear Oil change
« Reply #3 on: April 23, 2019, 04:05:41 PM »
Kymco typically vents the gear box into the carb/throttle body side of the airfilter with a small formed rubber-like hose/tube. Usually at the rear of the air filter box.



Thanks, I managed to find it. (Small /thin hose, linked between the gearbox and rear of the air filter box).

Life is a journey. Just spend some time, and enjoy the trip.

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14690
  • Rural Ohio
    • View Profile
Re: Gear Oil change
« Reply #4 on: April 23, 2019, 05:42:57 PM »


Yep, right there.
Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7763
  • West Tennessee, USA
    • View Profile
Re: Gear Oil change
« Reply #5 on: April 23, 2019, 07:33:09 PM »
Really SHORT on the Like, ain't it!
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

scootertherapy

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
« Last Edit: September 26, 2019, 06:00:32 PM by scootertherapy »

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14690
  • Rural Ohio
    • View Profile
Re: Gear Oil change
« Reply #7 on: September 26, 2019, 07:23:07 PM »
The syringe looks to be of high quality Stig. Where can I get one like that?  Oh.. I just noticed.. It's a martha stewart syringe? lolz  Found a knock off...

Also works great if you overfill your engine oil by a bit. Slip the tube off of the bottom of a household finger pump spray bottle. Put it on the syringe needle to reach into the oil via the dipstick hole. Suck out as much as you need.
 I tried two of the cheap plastic syringes sold in auto parts area of malwart - lousy.

Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

scootertherapy

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
Re: Gear Oil change
« Reply #8 on: September 26, 2019, 09:40:38 PM »
Thank you for all your very insightful  & helpful write ups.  I remember also having an automotive syringe that was also terrible.  There is no therapy like scooter therapy. 😄😊🙃
Martha's 'OEM' is on sale too.. https://www.macys.com/shop/product/martha-stewart-collection-marinade-injector-created-for-macys?ID=4768568
« Last Edit: September 26, 2019, 09:50:10 PM by scootertherapy »

JJJoseph

  • Hero Member
  • *****
  • Posts: 892
  • Kymco Sento
    • View Profile
Re: Gear Oil change
« Reply #9 on: September 27, 2019, 01:23:57 AM »
If you know anyone in the health care business, a 135ml plastic squeeze enema bottle is one of the handiest gearbox filler tools!

john grinsel

  • Hero Member
  • *****
  • Posts: 1044
    • View Profile
Re: Gear Oil change
« Reply #10 on: September 27, 2019, 09:08:34 AM »
I find Kymco maint. requirements sometimes too frequent----probably designed for bikes that are not ridden much or big miles----I would say LIKE, every 10,000 miles or 2 years---but make sure level is right.

mousejunks

  • Hero Member
  • *****
  • Posts: 585
    • View Profile
Re: Gear Oil change
« Reply #11 on: April 12, 2021, 07:53:26 AM »
I find Kymco maint. requirements sometimes too frequent----probably designed for bikes that are not ridden much or big miles----I would say LIKE, every 10,000 miles or 2 years---but make sure level is right.


The manual specifies SAE90 every 5000km but I think it's too frequent. I do mine every 10,000km and it comes out clean every time. It's the same oil used in car gearboxes and transmissions that are changed every 30, 50, or 80,000km or so which experience much more severe loads and temps.

Late response I know
'09 Kymco Espresso 150i
'11 Kymco Downtown 300i ABS - 79,500km
'17 Kymco Downtown 350i ABS

Like50

  • Full Member
  • ***
  • Posts: 102
  • Finland
    • View Profile
Re: Gear Oil change
« Reply #12 on: November 20, 2021, 12:02:43 PM »
I did at 20.6. when 3392 km driven total,
https://www.motonet.fi/fi/tuote/593071/Motul-Scooter-Gear-80W-90-015L-peraoljy
and today four months later with 7890 km total,
https://www.motonet.fi/fi/tuote/590023/MAG1-LS-GL5-lukkoperaoljy-80W-90-09l

Both those are easy to fill without extra tools, thats why, and api 4 and 5 are quality enough for Like 50 that is nine years old, IMO.
Next change I will do spring anyway, easy five minutes job itself.
Seeking used Kymco moped scooter

Neil955i

  • Hero Member
  • *****
  • Posts: 4549
  • Cheshire, UK. The older I get, the faster I was...
    • View Profile
Re: Gear Oil change
« Reply #13 on: November 20, 2021, 12:17:23 PM »
Like 200: “I’m ready for my close up Mr De Mille”…
Regards & ride safe,
Neil

Current garage:  Kymco DTX360 & Triumph Street Triple 675R
Past bikes: BSA C15. Honda S/wing (GL500). Kawasaki GPz750. BMW K100RS. Kawasaki GPZ900R. Yamaha FJ1200 x2. Sprint. Triumph Daytona 900. Kawasaki ZX-7R. T595 Daytona. Kawasaki ZX-9R x2. Triumph Daytona 955i. X-Town

An Error Has Occurred!

Call to undefined function split()