Author Topic: RPM  (Read 3409 times)

Nireen

  • Hero Member
  • *****
  • Posts: 550
    • View Profile
Re: RPM
« Reply #45 on: June 06, 2019, 09:30:39 AM »
Who was it that said they get there bike up to 160km/h!!!! how do they do that!
Kat :)

de dee

  • Hero Member
  • *****
  • Posts: 2055
  • 2011 300i downtown 82,265 KM.
    • View Profile
Re: RPM
« Reply #46 on: June 07, 2019, 05:15:02 PM »
steep downhill with the wind at your back   or get a bigger scooter,  even my Piaggio b v 350 is electrically cut off at 85  MPH,  with power to spare,.  Alex at scooter west .com has modified his for 100 MPH.  the manual warns us not to go to fast with windshield and top box on the scooter,.  on my trip to east coast I went over 160 Kmph,. with no bad feeling with scooter,  with wind shield and large top box,.  just for short runs,  I allways stick to the speed limits on long trips,  or ride with the flow of traffic,. 

scooterfan

  • Hero Member
  • *****
  • Posts: 764
  • Durban, South Africa to Ankeny IA.
    • View Profile
Re: RPM
« Reply #47 on: June 07, 2019, 07:16:26 PM »
Now this thread is really getting interesting. I always thought scooters are only for people who like cruising at mild speed but I clearly got it all wrong lol
Life is a journey. Just spend some time, and enjoy the trip.

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Re: RPM
« Reply #48 on: June 07, 2019, 07:22:05 PM »
Yeah, and De dee is like Burt Monroe, he is over 80 and still rides the World's Fastest Indian! Har har!
(I can razz him 'cause I'm 78!)
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

Nireen

  • Hero Member
  • *****
  • Posts: 550
    • View Profile
Re: RPM
« Reply #49 on: June 07, 2019, 07:37:54 PM »
Now this thread is really getting interesting. I always thought scooters are only for people who like cruising at mild speed but I clearly got it all wrong lol

Ha Ha Yes I am mild and always slow intown and always stay far back from everyone watching every move everyone makes but  I tell ya when I hit the highway I like to open it up in safe areas and if I am passing which has to happen at times I like to have the leverage if need be!! zoom zoom! :D
Kat :)

Nireen

  • Hero Member
  • *****
  • Posts: 550
    • View Profile
Re: RPM
« Reply #50 on: June 07, 2019, 07:39:30 PM »
Yeah, and De dee is like Burt Monroe, he is over 80 and still rides the World's Fastest Indian! Har har!
(I can razz him 'cause I'm 78!)

Ah I love wiser gentleman who have gone the distance.  High respect. :D Bless you always...
Kat :)

de dee

  • Hero Member
  • *****
  • Posts: 2055
  • 2011 300i downtown 82,265 KM.
    • View Profile
Re: RPM
« Reply #51 on: June 23, 2019, 03:28:37 AM »
did a little run on 5the 401 highway about 100 km.  followed the cars at 120 to 140 km.s  my tach.  read 6000 rpm to 6500.rpm. at 120 kmph. that is with the modifiyed variator I filed 5 years ago.,  not bad for a couple of hours work,  with the variator out of the scooter, with no cost,.  except for the belt file I bought ,  1/2 " wide just right size  for the variator ,.  I found out it is what malossi speed variator does with there units,  they must have coppied my work,  HA HA

Nireen

  • Hero Member
  • *****
  • Posts: 550
    • View Profile
Re: RPM
« Reply #52 on: June 23, 2019, 11:02:30 AM »
did a little run on 5the 401 highway about 100 km.  followed the cars at 120 to 140 km.s  my tach.  read 6000 rpm to 6500.rpm. at 120 kmph. that is with the modifiyed variator I filed 5 years ago.,  not bad for a couple of hours work,  with the variator out of the scooter, with no cost,.  except for the belt file I bought ,  1/2 " wide just right size  for the variator ,.  I found out it is what malossi speed variator does with there units,  they must have coppied my work,  HA HA

Ha Ha yes.  I am now about 6500 rpm at 120km's :D
Kat :)

de dee

  • Hero Member
  • *****
  • Posts: 2055
  • 2011 300i downtown 82,265 KM.
    • View Profile
Re: RPM
« Reply #53 on: June 23, 2019, 02:49:22 PM »
 :D ;D ;D ;D

mrbios

  • 2005 Kymco Grandvista 250cc
  • Hero Member
  • *****
  • Posts: 619
  • Just crusing along on my 2005 GV250
    • View Profile
    • My YouTube Channel
Re: RPM
« Reply #54 on: July 02, 2019, 06:42:17 PM »
Still no top-speed like I use to have.  I get reach 75 mile per hour and that is it.  I use to do easy 85.  New filter K&N New heavier rollers (better rpm) when I reached 75 mile this morning it was maxed out 8000 rpm.

I watched your video.  Variators don't seem to be opening and closing it might be a good idea to dissemble and recheck everything and maybe just replace the belt if the existing one is the correct size you could label the date & miles and save it.  Also, at around 18K I had to take off my rear variator and regrease it because it wouldn't disengage into neutral it was dragging like I was still in gear when I came to a stop.
PaulC

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Re: RPM
« Reply #55 on: July 02, 2019, 07:01:19 PM »
I have not been impressed by your "mechanics," Kat. They should have found the problem by now or at least, eliminated the many suggestions on here. I had a ride on the freeway/motorway/interstate today and 60 mph = 6000 rpm, 65 mph = 6200 rpm and 70 mph = 6500 rpm. I think that is what I have been seeing since 2013 on this model. 'Course this is all a repeat of what has been posted. I think MrBios has a good point. Your mechs/techs need to listen to him.
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

An Error Has Occurred!

Call to undefined function split()