What is your top-speed on your DTown?

[Nireen]

Please share.  Mine was always 135 km's but now it sits at about 125 km's

[CROSSBOLT]

I have had both of mine to 80 mph, had some left but backed off.

[stuo]

80+ mph. I say + because I backed off the throttle at 80.

[Tromper]

Is your belt getting a bit worn there Kat?

[Nireen]

Is your belt getting a bit worn there Kat?

Hello Belt was changed and rollers changed at about 25,000 km's. I am not at about 26,000, kms'

[Nireen]

I have had both of mine to 80 mph, had some left but backed off.

Yes this sounds about same as mine. 

[fjakkarin300i]

I usually drive 150+ km/h on the highway. Limit is 130 and I pass others without problems.

[ScooterWolf]

I recently rode to Pittsburgh from Philadelphia on mine. My top speed was 85 when I was passing a small convoy of trucks. It felt stressed, but not exactly at its limit.

- Wolf

[Nireen]

I usually drive 150+ km/h on the highway. Limit is 130 and I pass others without problems.

Wow! 150 plus!! I get 140km max

[Tobu1211]

2014 DT here.

It tops at around 140-145 km/h or around 90 mph.

Pretty good i´d say

[mousejunks]

2014 DT here.

It tops at around 140-145 km/h or around 90 mph.

Pretty good i´d say

Yeah that sounds about right, similar to what everyone else is saying. I have achieved about 140 indicated on mine but not on 100% throttle.

[Stig / Major Tom]

I usually drive 150+ km/h on the highway. Limit is 130 and I pass others without problems.

Which country has 80mph speed limit?
And you HOLD your 300 Kymco at 93+mph?
Stig

[AMAC1680]

Which country has 80mph speed limit?
And you HOLD your 300 Kymco at 93+mph?
Stig

The good ol USA has them.
Last summer thru Idaho, Wyoming etal posted speed on the slab 80mph.

AMAC

[Stig / Major Tom]

The good ol USA has them.
Last summer thru Idaho, Wyoming etal posted speed on the slab 80mph.

AMAC

At that speed you can't enjoy the Bud Lite cans and Mt Dews along the roadside!
Gotta slow down and take in the wonders....

Stig

[stuo]

88mph indicated, and that with 13 gram rollers, tach around 8500 rpm's.