Author Topic: Bike Broke Down! :(  (Read 1263 times)

Nireen

  • Hero Member
  • *****
  • Posts: 550
    • View Profile
Bike Broke Down! :(
« on: July 17, 2019, 05:13:33 AM »
Hey yesterday my bike stalled on the highway.  Tried to start it and it would start and than die so I figured I may need gas but I still had two bars left on the meter indicating I was good but still got some and it started and stayed going after a little pumping of the gas.  But! it is making a very strange sound, seems to be vibrating more than usual and when in idle state it moves forward!! It seems to be idling faster to. What is it?
Kat :)

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Re: Bike Broke Down! :(
« Reply #1 on: July 17, 2019, 11:48:57 AM »
Air filter? Vacuum tube off? Intake loose? Loose plug wire/cap? Battery connection?
« Last Edit: July 17, 2019, 12:00:42 PM by CROSSBOLT »
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

xsel777

  • Hero Member
  • *****
  • Posts: 670
    • View Profile
Re: Bike Broke Down! :(
« Reply #2 on: July 17, 2019, 02:07:23 PM »
Could be clutch is in a state that causes bike to move forward, damaged spring perhaps.
This accounts for the stalling after starting , but not for the high revs,so I am probably wrong.

high revs, and cutting out, vacuum pipe?



Sent from my Mi Max using Tapatalk

2010 Kymco Xciting 500Ri-Dark Blue

Nireen

  • Hero Member
  • *****
  • Posts: 550
    • View Profile
Re: Bike Broke Down! :(
« Reply #3 on: July 17, 2019, 05:51:15 PM »
Just got the bike back what happened is one or two of the rollers were flipped over! He asked me when it happened how hard I was braking.  I was stopping hard for the berry stand on the side of the road :)  He said I very soon will need a new clutch or get the Kymco rollers. 
Kat :)

ScooterWolf

  • Hero Member
  • *****
  • Posts: 1171
    • View Profile
Re: Bike Broke Down! :(
« Reply #4 on: July 18, 2019, 01:32:16 AM »
Glad you got it figured out and fixed. Sounded very mysterious.

- Wolf

xsel777

  • Hero Member
  • *****
  • Posts: 670
    • View Profile
Re: Bike Broke Down! :(
« Reply #5 on: July 18, 2019, 06:09:13 AM »
So you have sliders by the sound of it. I have had bad experience with them, so I personally don't recommend them.
However, others have had zero issues, so I can't say what the difference is in the situations, that it works perfectly for one, and issues for others.
Perhaps the they are installed,
or the variator has a certain type of wear.
Just guessing here.
I went with a sports variator, and ditched the rollers they provided, and used my stock rollers, and got a better top end with lower revs, thus saving on the engine wear and tear.
Well, that is the theory, anyway.


Sent from my Mi Max using Tapatalk

2010 Kymco Xciting 500Ri-Dark Blue

mousejunks

  • Hero Member
  • *****
  • Posts: 585
    • View Profile
Re: Bike Broke Down! :(
« Reply #6 on: July 18, 2019, 12:32:57 PM »
I'm glad your safe and the issue was caused by something relatively simple.
'09 Kymco Espresso 150i
'11 Kymco Downtown 300i ABS - 79,500km
'17 Kymco Downtown 350i ABS

Nireen

  • Hero Member
  • *****
  • Posts: 550
    • View Profile
Re: Bike Broke Down! :(
« Reply #7 on: July 18, 2019, 09:31:30 PM »
Yes me to.  and yes they were sliders in it.
Kat :)

KymcoRockr

  • Full Member
  • ***
  • Posts: 124
    • View Profile
Re: Bike Broke Down! :(
« Reply #8 on: July 30, 2019, 08:44:42 PM »
Welcome to the wonderful world of Dr Pulley sliders.
Been riding for a very long time.
AK550
Yager 200

mrbios

  • 2005 Kymco Grandvista 250cc
  • Hero Member
  • *****
  • Posts: 619
  • Just crusing along on my 2005 GV250
    • View Profile
    • My YouTube Channel
Re: Bike Broke Down! :(
« Reply #9 on: July 30, 2019, 09:44:14 PM »
Welcome to the wonderful world of Dr Pulley sliders.

I have 17K miles on my Dr Pulley sliders no problems so far.
PaulC

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14692
  • Rural Ohio
    • View Profile
Re: Bike Broke Down! :(
« Reply #10 on: July 30, 2019, 09:59:54 PM »
15,500 on mine - also no problem.
Maybe big engines don't like them....but come to think of it, my Burgman 400 liked them.
So, not being installed correctly -- including that final placement back on the shaft?!
Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

kneeslider

  • Hero Member
  • *****
  • Posts: 547
    • View Profile
Re: Bike Broke Down! :(
« Reply #11 on: August 13, 2019, 08:17:43 AM »
Just got the bike back what happened is one or two of the rollers were flipped over! He asked me when it happened how hard I was braking.  I was stopping hard for the berry stand on the side of the road :)  He said I very soon will need a new clutch or get the Kymco rollers.

That is one issue with Dr Pulley sliders.

Tech Pulley now have little 'wings' that prevent that flip over.

Perhaps you can try those.
2019 Yamaha X-Max 250

An Error Has Occurred!

Call to undefined function split()