Author Topic: Stuck on final drive shaft replacement  (Read 2059 times)

Ajayprasad

  • Newbie
  • *
  • Posts: 17
    • View Profile
Stuck on final drive shaft replacement
« on: September 26, 2019, 09:54:10 AM »
I am attempting to get into the gearbox so I can change the drive shaft but I don't know how to open it. I have the service manual and it's vague. What I have is different from all the how to videos and text that I can find on the subject. Inferior to the crankshaft is a part I've never seen before and have no idea how to remove. Anyone know what that is and how to open up this type of transmission? Much appreciated.

I can't seem to add any pictures. Hopefully someone knows what I'm referring to, it looks like a long case minarelli and the dimensions seem correct. The left crankcase has three bolts by the drive pulley and it does not appear to support a panel, so I think the right side must be removed. The right side has the part that attaches to the brake cable and then is the "hammer drive anchor?"

245luigi

  • Sr. Member
  • ****
  • Posts: 334
  • Boston, MA
    • View Profile
Re: Stuck on final drive shaft replacement
« Reply #1 on: September 28, 2019, 07:13:03 PM »
Please add pics, no idea what you are talking about.

Upload them to imgur then post the link here
Currently:
2012 Kymco Like70
72cc Malossi BBK
Dell'Orto PHBG 19 AS Carb
52 Pilot Jet
92 Main Jet
W7 Needle, 40 Slide
2T atomizer + bushing
Tecnigas Triops
Malossi Torque Driver

245luigi

  • Sr. Member
  • ****
  • Posts: 334
  • Boston, MA
    • View Profile
Re: Stuck on final drive shaft replacement
« Reply #2 on: September 28, 2019, 07:34:18 PM »
Remove these bolts to access final drive
Currently:
2012 Kymco Like70
72cc Malossi BBK
Dell'Orto PHBG 19 AS Carb
52 Pilot Jet
92 Main Jet
W7 Needle, 40 Slide
2T atomizer + bushing
Tecnigas Triops
Malossi Torque Driver

Ajayprasad

  • Newbie
  • *
  • Posts: 17
    • View Profile
Re: Stuck on final drive shaft replacement
« Reply #3 on: September 29, 2019, 12:09:40 AM »
https://m.imgur.com/a/uVKpT7C

Thanks, I didn’t know how to get around the size restriction for the photos. So the case is different then diagrammed and I think I need to pry it off at this point.

245luigi

  • Sr. Member
  • ****
  • Posts: 334
  • Boston, MA
    • View Profile
Re: Stuck on final drive shaft replacement
« Reply #4 on: October 03, 2019, 03:08:41 PM »
It looks like all you need to do at this point is just separate the final drive and cvt case
Currently:
2012 Kymco Like70
72cc Malossi BBK
Dell'Orto PHBG 19 AS Carb
52 Pilot Jet
92 Main Jet
W7 Needle, 40 Slide
2T atomizer + bushing
Tecnigas Triops
Malossi Torque Driver

JJJoseph

  • Hero Member
  • *****
  • Posts: 892
  • Kymco Sento
    • View Profile
Re: Stuck on final drive shaft replacement
« Reply #5 on: October 04, 2019, 04:06:02 AM »
https://m.imgur.com/a/uVKpT7C

 I think I need to pry it off at this point.

Yikes! Don't "pry" anything until you're sure of what's going to happen.  The case comes apart easily, with almost no effort, when you remove the bolts.  It's almost a no-brainer.

Ajayprasad

  • Newbie
  • *
  • Posts: 17
    • View Profile
Re: Stuck on final drive shaft replacement
« Reply #6 on: October 04, 2019, 08:45:27 AM »
I am pleased to inform that I got everything replaced with no damage. It just took a little bit of elbow grease.

An Error Has Occurred!

Call to undefined function split()