Author Topic: Bike moves forward on it's own?  (Read 533 times)

Nireen

  • Hero Member
  • *****
  • Posts: 550
    • View Profile
Bike moves forward on it's own?
« on: April 19, 2020, 12:12:04 PM »
It had done this twice in the last two days.  I start up the bike it was fine as it warmed up and as soon as I slightly touched the gas it would change and idle fast and move forward on it's own.  I would go someplace stop and start up again and it would be fine.  What is happening? 
Kat :)

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14362
  • Rural Ohio
    • View Profile
Re: Bike moves forward on it's own?
« Reply #1 on: April 19, 2020, 12:18:36 PM »
Enrichment circuit in EFI (choke) slow to let go when cold starting? would be my guess.
 With warm starts, ECU says no enriching needed.
Has bike been sitting alot this winter? See if it starts acting normal after several rides.
Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

Nireen

  • Hero Member
  • *****
  • Posts: 550
    • View Profile
Re: Bike moves forward on it's own?
« Reply #2 on: April 19, 2020, 01:32:11 PM »
Enrichment circuit in EFI (choke) slow to let go when cold starting? would be my guess.
 With warm starts, ECU says no enriching needed.
Has bike been sitting alot this winter? See if it starts acting normal after several rides.
Stig

Yes it has been sitting for a few months.  OK will watch how it gets along.  How do I fix it if it is what you said?
Kat :)

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14362
  • Rural Ohio
    • View Profile
Re: Bike moves forward on it's own?
« Reply #3 on: April 19, 2020, 03:00:29 PM »
Yes it has been sitting for a few months.  OK will watch how it gets along.  How do I fix it if it is what you said?
Ride it several times and see if it clears....or try the re-set, initializing.
Maybe a 300 owner can tell you how to do that?

Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

An Error Has Occurred!

Call to undefined function split()