Kymco Like 200i Scooter Valve Clearance Adjustment

[Stig / Major Tom]

Great video.
Two points:
It is not necessary to remove the battery - just place a heavy cloth over the battery.
Also, please check for a slight movement in the rocker arms to insure that you are at TDC - if there is no movement you could be 360 degrees off, and you will need to rotate the engine again.



Major Tom

[RonnieFranchise]

Great video.
Two points:
It is not necessary to remove the battery - just place a heavy cloth over the battery.
Also, please check for a slight movement in the rocker arms to insure that you are at TDC - if there is no movement you could be 360 degrees off, and you will need to rotate the engine again.



Will this be the same spec/procedure on my Like 150i ?  And do you know where I can find a book on torque specs, etc. for my 150i?

Major Tom

[Stig / Major Tom]

No.
Different engine. Different method of getting to the valve cover.
Www.cyclepedia.com has service manual for your scooter, with torque specs, etc.
There may be a YouTube video for your scooter model. I do not know...I've never looked.....

Also, Welcome to the forum!
Stig

[mojorising]

i have a 150i and ive done the valve adjustment multiple times. there are 4 of them that need to be adjusted. my service manual suggests intake set to .12mm and exhaust set to .12mm. However ive found that is way too loose and i set mine to intake .003mm and exhaust to .004mm. Hope this helps