Clutch kits for Chinese 125 / 150 cc scooters fit Agilty 125.

[scooterfan]

My Agility’s clutch had to be replaced - so I visited a local dealer who specialize in selling all sorts of aftermarket spare parts for motorcycles and scooters. I asked whether they would have a clutch kit for an Agility 125. The guy told me “ If your scooter has a GY6 engine, I do have a clutch kit in stock - it fits all 125 a d 150cc models, those models all use the same clutch kit”.

I was still worried that the clutch kit might not fit, but the guy told me “If it doesn’t  fit, just bring it back and you can have your money back”.

So I took the clutch- knowing that the price of the genuine clutch is about twice as much. The clutch kit with bell have been installed today, and is an exact match. Before installation all components have been compared, and all sizes are The same. The only differences I could find was the metal color of the bells, and the absence of a brand name on the new bell. The new bell has a dull grey color, while the original Kymco bell has a shiny, almost dull stainless steel color.

In short - clutch kits for 125 and 150cc Chinese scooters are an exact match for Agility 125 scooters.

[TBR125]

Thanks for the info. Fit is always a worry with Chinese GY6 parts.

[CROSSBOLT]

That's good info! Need more of that kind of knowledge!

[JJJoseph]

Fit is always a worry with Chinese GY6 parts.

That's not been my experience.  Chinese parts are excellent quality and always fit.  They're totally interchangeable.  There's some exceptions.  Kymco 100cc engines don't have a Chinese counterpart, but some Kawasaki 90cc Chinese ATV parts fit.  Go figger!

[jeeves]

That's not been my experience.  Chinese parts are excellent quality and always fit.  They're totally interchangeable.  There's some exceptions.  Kymco 100cc engines don't have a Chinese counterpart, but some Kawasaki 90cc Chinese ATV parts fit.  Go figger!

Some thing fit perfectly, some thing don't.

R/R was only good from Kymco, same as vacuum membrane in the carburetor.
GY6 fuel level sensor needed a bit of bending to show the correct amount of fuel in the tank.

Transmission parts fit ok, but quality is not at the same level.



Sent from my Redmi 4 using Tapatalk

[TBR125]

My fit problem may be from believing ebay listings.

[JJJoseph]

R/R was only good from Kymco, same as vacuum membrane in the carburetor.

You need to do a little research when using off-brand parts.  For example, My Kymco Sento 100 has a Kymco-brand carburetor (a really excellent carb), not a Keihin carb like most Chinese scooters (which are mostly OK).  So carb parts like the vacuum membrane are different. The Kymco starter is awesome - but different. But the CDI, coil, variator, clutch, camshaft, cylinder head, brakes, battery, tires, etc are all interchangeable with the GY6 versions. Now here's something unexpected: Kymco mirrors (at $49 each) are outstanding and worth the price!  Chinese $10 on-line mirrors are total junk. And that's my report for today.